Konektante Sunpak Autozoom 333 Tiristor al DSLR: Kompleta Gvidilo

** Sunpak Autozoom 333 Meets DSLR: How to Make Your Video Camera Pop Without the Technology Jargon **.

(Konektante Sunpak Autozoom 333 Tiristor al DSLR: Kompleta Gvidilo)

So you’ve got a DSLR. You’ve additionally got this chunky Sunpak Autozoom 333 Thyristor flash from the ’80s. You want them to interact. But the hands-on seem like robotic talk. Let’s deal with that.

First, know this: the Sunpak Autozoom 333 is old yet gold. It resembles a classic car– developed hard, straightforward, however requires a little love to deal with modern-day devices. Your DSLR isn’t made for this flash. That’s all right. We’ll link the space.

Begin with the basics. Discover the warm footwear on your DSLR– that metal brace on the top. The Sunpak’s foot slides into it. Make sure the flash is off prior to connecting. Tighten the locking screw gently. Too tight, and you’ll scrape the camera. Also loose, and the flash wobbles.

Currently, examine the voltage. Old flashes like the Sunpak often send way too much power to contemporary cams. This can fry your DSLR’s circuits. Terrifying, best? Test the flash’s trigger voltage with a voltmeter. If it’s under 12 voltoj, you’re risk-free. Otherwise, buy a voltage regulator. Plug it between the flash and cam. Problem addressed.

Poste, set the flash to hand-operated setting. The Sunpak’s automobile settings are amazing, however DSLRs do not constantly play nice with them. Guidebook provides you regulate. Change the power setups– start at 1/4 power. Evaluate it. As well bright? Call it down. Also dim? Crank it up.

Sync the flash with your electronic camera’s shutter. DSLRs make use of a “focal plane shutter.” If your shutter speed is too quick, the flash only lights component of the image. Keep speeds at 1/200 or slower. Check your cam’s handbook for the exact “sync speed.” Adhere to that.

Use the flash’s zoom function. The Autozoom 333 lets you adjust the light spread. Match it to your lens’s focal size. Shooting with a 50mm lens? Establish the flash to 50mm. This concentrates the light where you need it.

Diffuse the light. The Sunpak’s beam is rough. Tape an item of white paper or a tissue over the flash head. It softens shadows. No fancy gear needed.

Examination, examination, examination. Take a photo. Examine the outcome. Too dark? Open the camera’s aperture broader or raise the flash power. Also intense? Do the contrary. Readjust the ISO if required. Maintain tweaking until it looks right.

Watch for red-eye. The flash is close to the lens. It happens. Repair it by jumping the light. Factor the flash upward or sidewards. Use a wall surface or ceiling as a reflector. No bounce surface? Hold a white card over the flash at a 45-degree angle.

Battery life matters. The Sunpak makes use of AA cells. Rechargeable ones save money. Bring spares. Nothing worse than a dead flash mid-shoot.

Ultimately, experiment. Try angles. Try colors. Tape a tinted gel over the flash for enjoyable effects. Mix sunshine with flash. Break guidelines. The objective is cool pictures, not excellent specifications.

(Konektante Sunpak Autozoom 333 Tiristor al DSLR: Kompleta Gvidilo)

The Sunpak Autozoom 333 isn’t sleek or cordless. Yet it’s dependable, powerful, and low-cost. Match it with your DSLR, and you have actually got a configuration that punches over its weight. No technology level required. Simply a bit of perseverance and a readiness to play.