MMSZ5231B DIODE ZENER 5.1V 500MW SOD123

Introduction of MMSZ5231B DIODE ZENER 5.1V 500MW SOD123

The MMSZ5231B DIODE ZENER 5.1V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. I modsætning til isolerede moduler, MMSZ5231B DIODE ZENER 5.1V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. Dette design forenkler kredsløbsstrukturen, reducerer omkostningerne, og forbedrer effektiviteten.

 

Features and Benefits of MMSZ5231B DIODE ZENER 5.1V 500MW SOD123

Kompakt design: Fordi der ikke kræves yderligere isolationskomponenter, MMSZ5231B DIODE ZENER 5.1V 500MW SOD123s are typically smaller and lighter in weight.

Høj ydeevne: Reduceret energitab på grund af isoleringskomponenter forbedrer den samlede konverteringseffektivitet.

Lave omkostninger: Dyre isolationskomponenter er elimineret, resulterer i lavere produktionsomkostninger.

Hurtig respons: Den indbyggede Fast Recovery Diode (FRD) kan hurtigt skifte fra en tændt tilstand til en blokerende tilstand, reduktion af koblingstab.

Høj pålidelighed: Avancerede materialer og teknologier bruges til at sikre stabil drift selv i barske miljøer.

Nem at installere og vedligeholde: Standardiserede grænseflader og forbindelser forenkler installationsprocessen og letter senere vedligeholdelse.

(MMSZ5231B DIODE ZENER 5.1V 500MW SOD123)

Specification of MMSZ5231B DIODE ZENER 5.1V 500MW SOD123

The MMSZ5231B is a Zener diode. It regulates voltage. Its main job is keeping a steady 5.1 volt. This voltage is nominal. Actual voltage might vary slightly. The tolerance is typically ±5%. So actual voltage stays between 4.845V and 5.355V. It handles power well. Its maximum power dissipation is 500 milliwatts. This rating applies at 25°C. Temperature affects this limit. Higher temperatures reduce the safe power level.

The diode comes in a SOD123 surface mount package. This package is small. It saves space on circuit boards. The compact size is good for modern electronics. Designers use it where space is tight. It has two leads. The cathode end is marked with a band. Correct orientation matters for installation.

It operates over a wide temperature range. The junction temperature can be from -65°C to +150°C. This makes it suitable for many environments. It functions reliably in different conditions. Electrical characteristics are measured at 25°C. Test conditions are important for specs.

The diode is useful for voltage regulation. It provides a stable reference voltage. Circuits need this for precision. It protects against voltage surges. It clamps voltages safely. It prevents damage to sensitive parts. You find it in power supplies. It stabilizes outputs. It guards inputs on integrated circuits. It manages transients in data lines. Its fast response time helps here. It works well in portable devices. Its small size and performance fit mobile applications. Engineers choose it for reliable clamping.

(MMSZ5231B DIODE ZENER 5.1V 500MW SOD123)

Applications of MMSZ5231B DIODE ZENER 5.1V 500MW SOD123

The MMSZ5231B diode is a Zener diode. It regulates voltage at 5.1 volt. Den klarer op til 500 milliwatts of power. Its small SOD123 package saves space on circuit boards. This diode is useful in many electronic devices.

One main job is voltage regulation. It keeps voltage steady at 5.1V. Circuits needing a stable 5V reference use it. It protects sensitive parts from voltage spikes. If input voltage rises too high, the Zener diode activates. It clamps the voltage to 5.1V. This prevents damage.

Another use is protecting inputs and outputs. Microcontrollers often connect to sensors or other devices. Voltage spikes can harm these connections. Adding the MMSZ5231B across the input or output line adds safety. It absorbs harmful surges. This is common in communication ports or sensor interfaces. USB ports sometimes use similar protection.

Power supplies benefit from this Zener too. It acts as a simple shunt regulator. Low-power circuits needing a fixed 5.1V find it effective. It’s cheaper than complex regulator chips. Its small size is a big plus for compact designs. Think gadgets, wearables, or small modules.

Voltage clamping is another key task. Circuits might see unexpected high voltage. The Zener diode limits this voltage. It prevents signals from exceeding safe levels. This protects transistors or integrated circuits. It’s a basic safety component.

The SOD123 package is surface-mount. It’s easy for automated assembly. Designers like its small footprint. It fits tight spaces easily. Its 500mW power rating suits many common applications. It handles typical power needs without bulk. Devices needing reliable 5.1V regulation choose it. Its balance of size, cost, and performance works well. You find it in consumer electronics, automotive modules, og industriel kontrol. It protects logic circuits. It stabilizes reference points. It ensures voltage stays safe.

Virksomhedsprofil

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) er en af ​​de førende virksomheder inden for kraftelektronikteknologi og kraftprodukter, som er fuldt involveret i at udvikle solcelle-invertere， transformere, spændingsregulatorer, fordelingsskabe, tyristorer， moduler， dioder， varmelegemer, og andre elektroniske enheder eller halvledere. Vi vil være forpligtet til at give brugerne høj kvalitet, effektive produkter og hensynsfuld service.

Det accepterer betaling med kreditkort, T/T, Vestunionen, og Paypal. PDDN vil sende varerne til kunder i udlandet gennem FedEx, DHL, til søs, eller med fly. If you want high-quality MMSZ5231B DIODE ZENER 5.1V 500MW SOD123, send os venligst forespørgsler; vi vil være her for at hjælpe dig.

 

Betalingsmetoder

L/C, T/T, Western Union, Paypal, Kreditkort osv.

 

Forsendelse

Ved havet, med fly, ved ekspres, som kunder efterspørger.

 

Opbevaringsbetingelser

1) Opbevares i et tørt miljø ved stuetemperatur.

2) Undgå fugt og høj temperatur.

3) Bruges umiddelbart efter åbning af den indvendige pakkepose.

5 FAQs of MMSZ5231B DIODE ZENER 5.1V 500MW SOD123

What is the MMSZ5231B Zener diode used for? This diode regulates voltage in circuits. It maintains a steady 5.1V output. It also protects components from voltage spikes. Common uses include power supplies and signal conditioning. It is reliable for basic regulation tasks.

What voltage does the MMSZ5231B provide? It operates at 5.1 volt. This specific voltage is key for many digital circuits. Tolerance is tight around this value. It ensures stable performance.

How much power can the MMSZ5231B handle? It dissipates up to 500 milliwatts. This power rating suits low-power applications. Designers must stay within this limit. Overloading risks damaging the diode.

What is the package type for the MMSZ5231B? It uses the SOD123 surface-mount package. This compact size saves board space. Two leads simplify soldering. It fits automated assembly processes well.

How does this diode protect electronic parts? It clamps voltage surges above 5.1V. Excess current flows through it harmlessly. This action shields sensitive components. It reacts quickly to overvoltage events.

(MMSZ5231B DIODE ZENER 5.1V 500MW SOD123)