Diode Bridge Rectifier KBJ408 Bridge Rectifier

Trosolwg o Rectifier Diodes

Dyfeisiau lled-ddargludyddion yw deuodau unioni a ddefnyddir yn bennaf ar gyfer trosi cerrynt eiledol (AC) i mewn i gerrynt uniongyrchol (DC). Maent yn caniatáu i gerrynt lifo'n hawdd i un cyfeiriad tra'n ei rwystro i'r cyfeiriad arall. Mae'r eiddo uncyfeiriad hwn yn eu gwneud yn gydrannau hanfodol mewn cyflenwadau pŵer, prosesu signal, a chylchedau electronig amrywiol. Gall deuodau unioni drin ystod eang o gerrynt a foltedd, gan eu gwneud yn amlbwrpas ar gyfer nifer o gymwysiadau.

Nodweddion Deuodau Rectifier

Dargludedd Uncyfeiriad: Yn hwyluso llif cerrynt i un cyfeiriad yn unig, rhwystro cerrynt gwrthdro i bob pwrpas.
Trin Cerrynt Uchel: Wedi'i gynllunio i gario cerrynt ymlaen sylweddol, addas ar gyfer cymwysiadau pŵer uchel.
Foltedd Gwrthdro Uchaf (PIV): Yn gallu gwrthsefyll folteddau gwrthdro uchel heb dorri i lawr.
Gostyngiad Foltedd Ymlaen Isel: Yn lleihau colled ynni fel gwres, gwella effeithlonrwydd.
Amser Adfer Cyflym: Yn trawsnewid yn gyflym o gyflwr dargludol i gyflwr nad yw'n ddargludol, yn fuddiol ar gyfer cymwysiadau amledd uchel.
Sefydlogrwydd Thermol: Yn cynnal perfformiad ar draws ystod tymheredd eang, sicrhau dibynadwyedd mewn amodau amrywiol.
Maint Compact: Mae ffactor ffurf fach yn hwyluso integreiddio i ddyluniadau electronig cryno.
Cost-effeithiol: Yn darparu ateb darbodus ar gyfer anghenion trosi AC-i-DC.
Amrywiaeth o Becynnau: Ar gael mewn opsiynau pecynnu lluosog i gyd-fynd â gwahanol ofynion mowntio.

(Diode Bridge Rectifier KBJ408 Bridge Rectifier)

Specification of Diode Bridge Rectifier KBJ408 Bridge Rectifier

The KBJ408 is a diode bridge rectifier. Mae'n newid cerrynt eiledol (AC) i mewn i gerrynt uniongyrchol (DC). This component is ready-made. It combines four diodes inside one block. You get DC output without building the circuit yourself.

This rectifier handles high voltage. Its maximum repetitive reverse voltage is 600 foltiau. It can manage peak voltages up to 800 foltiau. This makes it strong for many power supply jobs.

Current capacity is important. The KBJ408 offers a 4.0 ampere average forward current rating. It can briefly handle much higher surge currents. This surge rating is 150 amperes. This helps survive power-on spikes.

Heat management matters. The rectifier works reliably within a specific temperature range. Its operating junction temperature goes from -55°C to +150°C. Proper heat sinking is necessary for best results. The device mounts using screw terminals. This ensures a solid electrical connection.

The KBJ408 uses a standard KBJ package. This package is common and easy to mount. It fits standard layouts found on many circuit boards. Its design provides good electrical isolation. This protects the circuit.

This rectifier suits numerous applications. It works well in power adapters and battery chargers. It fits motor drives and appliance controls. Industrial power supplies often use it. Its robust design handles tough conditions.

Reliability is key. The KBJ408 uses proven silicon technology. Its construction ensures consistent performance. Mae'n cwrdd â safonau diwydiant cyffredin. Users trust it for steady DC power conversion.

(Diode Bridge Rectifier KBJ408 Bridge Rectifier)

Applications of Diode Bridge Rectifier KBJ408 Bridge Rectifier

The KBJ408 bridge rectifier turns AC power into DC power. This is vital for many electronic devices needing steady DC voltage. It uses four diodes in a bridge setup. This design efficiently converts both halves of the AC wave.

You find bridge rectifiers like the KBJ408 inside AC adapters. These power laptops, routers, and phone chargers. The rectifier changes wall outlet AC into DC the device uses. It’s a key part of the power supply circuit.

Battery chargers rely on bridge rectifiers. The KBJ408 converts AC to DC for charging batteries in power tools, electric vehicles, and UPS systems. It provides the correct DC current to refill the battery.

Industrial motor controls use these components. The KBJ408 helps convert AC power to DC for controlling motor speed and direction in factory equipment. It ensures smooth DC power for the motor drive circuits.

Welding machines need strong DC power. The KBJ408 rectifier helps generate the stable DC current required for arc welding. It handles the high power demands reliably.

LED lighting drivers incorporate bridge rectifiers. The KBJ408 converts mains AC to DC for powering LED arrays efficiently. This ensures consistent light output without flicker.

Power supplies for computers and servers use bridge rectifiers. The KBJ408 sits at the input stage, converting incoming AC to usable DC for the rest of the power supply components. It’s fundamental for stable operation.

Automotive alternators sometimes use bridge rectifiers. The KBJ408 can convert the alternator’s AC output into DC for charging the car battery and powering electrical systems. It manages the vehicle’s electrical power flow.

This rectifier is compact and robust. Its 4 Amp current rating and 800 Volt peak reverse voltage suit many common applications. The KBJ408 offers reliable performance in demanding environments. Its through-hole design makes it easy to mount on circuit boards.

Proffil Cwmni

PDDN Photoelectron Technology Co., Cyf.(sales@pddn.com) yw un o'r mentrau blaenllaw ym maes technoleg electroneg pŵer a chynhyrchion pŵer, sy'n ymwneud yn llawn â datblygu gwrthdroyddion solar， trawsnewidyddion, rheolyddion foltedd, cypyrddau dosbarthu, thyristors， modiwlau， deuodau， gwresogyddion, a dyfeisiau electronig neu led-ddargludyddion eraill. Byddwn wedi ymrwymo i ddarparu defnyddwyr o ansawdd uchel, cynhyrchion effeithlon a gwasanaeth ystyriol.

Mae'n derbyn taliad trwy Gerdyn Credyd, T/T, Undeb y Gorllewin, a Paypal. Bydd PDDN yn cludo'r nwyddau i gwsmeriaid dramor trwy FedEx, DHL, ar y môr, neu yn yr awyr. If you want high-quality Diode Bridge Rectifier KBJ408 Bridge Rectifier, anfonwch ymholiadau atom; byddwn ni yma i'ch helpu chi.

Dulliau Talu

L/C, T/T, Undeb gorllewinol, Paypal, Cerdyn Credyd ac ati.

Cludo

Ar y môr, mewn awyren, trwy fynegi, fel cais cwsmeriaid.

Amodau Storio

1) Storio mewn amgylchedd sych ar dymheredd ystafell.

2) Osgoi lleithder a thymheredd uchel.

3) Defnyddiwch yn syth ar ôl agor y bag pacio mewnol.

5 FAQs of Diode Bridge Rectifier KBJ408 Bridge Rectifier

The KBJ408 is a bridge rectifier diode. It changes AC voltage to DC voltage. People often ask these questions about it.

What does the KBJ408 bridge rectifier do? Mae'n trosi cerrynt eiledol (AC) i mewn i gerrynt uniongyrchol (DC). This is needed for many electronic devices running on DC power. It combines four diodes in one package.

What voltage can the KBJ408 handle? Its maximum input AC voltage is 400 foltiau. Its maximum average forward current is 4 amps. These limits are important. Exceeding them damages the component.

How do I connect the KBJ408? It has four pins. Two pins are for the AC input voltage. You connect your AC source here. The other two pins give the positive and negative DC output. You connect these to your circuit. Check the pinout diagram carefully.

Does the KBJ408 need a heatsink? It depends on your current draw. Running near its 4A limit requires a heatsink. Using it without a heatsink at high currents causes overheating. Overheating leads to failure.

What happens if the KBJ408 fails? A failed rectifier often causes no DC output. Your device stops working. Sometimes you see excessive heat. Sometimes you smell burning. Check its input and output voltages. Replace it if faulty.

(Diode Bridge Rectifier KBJ408 Bridge Rectifier)