MMSZ4689T3 DIODE ZENER 5.1V 500MW SOD123

Introduction of MMSZ4689T3 DIODE ZENER 5.1V 500MW SOD123

The MMSZ4689T3 DIODE ZENER 5.1V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Yn wahanol i fodiwlau ynysig, MMSZ4689T3 DIODE ZENER 5.1V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. Mae'r dyluniad hwn yn symleiddio'r strwythur cylched, yn lleihau cost, ac yn gwella effeithlonrwydd.

 

Features and Benefits of MMSZ4689T3 DIODE ZENER 5.1V 500MW SOD123

Dyluniad compact: Oherwydd nad oes angen unrhyw gydrannau ynysu ychwanegol, MMSZ4689T3 DIODE ZENER 5.1V 500MW SOD123s are typically smaller and lighter in weight.

Perfformiad uchel: Mae colli llai o ynni oherwydd cydrannau ynysu yn gwella effeithlonrwydd trosi cyffredinol.

Cost Isel: Mae cydrannau ynysu drud yn cael eu dileu, gan arwain at gostau gweithgynhyrchu is.

Ymateb Cyflym: Y Deuod Adfer Cyflym sydd wedi'i ymgorffori (FRD) yn gallu newid yn gyflym o gyflwr ar-gyflwr i gyflwr blocio, lleihau colledion newid.

Dibynadwyedd Uchel: Defnyddir deunyddiau a thechnolegau uwch i sicrhau gweithrediad sefydlog hyd yn oed mewn amgylcheddau garw.

Hawdd i'w osod a'i gynnal: Mae rhyngwynebau a chysylltiadau safonol yn symleiddio'r broses osod ac yn hwyluso gwaith cynnal a chadw diweddarach.

(MMSZ4689T3 DIODE ZENER 5.1V 500MW SOD123)

Specification of MMSZ4689T3 DIODE ZENER 5.1V 500MW SOD123

This diode is the MMSZ4689T3. Mae'n ddeuod Zener. Zener diodes control voltage. They keep voltage steady. This one is set for 5.1 foltiau. That’s its Zener voltage. It’s very common. You see it a lot in circuits needing stable 5 foltiau.

The diode handles 500 miliwat o bŵer. Power is heat. This limit matters for reliability. Don’t exceed it. The SOD123 package is small. Mae'n arbed lle ar fyrddau cylched. Surface-mount technology uses this package. It’s good for modern electronics. Assembly machines place it easily.

The diode works well for voltage regulation. Use it to fix a 5.1V point. It protects sensitive parts. If voltage spikes too high, the diode stops it. Mae'n clampio'r foltedd yn ddiogel. This guards inputs and outputs.

It manages a typical current of 5 miliampau. This relates to its voltage regulation ability. Its tolerance is ±5%. The actual voltage might be between 4.845V and 5.355V. This is acceptable for many uses. Temperature affects the voltage slightly. The data sheet gives details.

Power dissipation depends on heat. The environment matters. Good board layout helps. Keep the diode cool. It performs better that way. Maximum junction temperature is 150°C. Don’t reach this limit.

Find this diode in power supplies. It stabilizes reference voltages. It protects I/O lines. Use it in automotive electronics. Use it in consumer devices. Its small size and standard voltage are key advantages.

(MMSZ4689T3 DIODE ZENER 5.1V 500MW SOD123)

Applications of MMSZ4689T3 DIODE ZENER 5.1V 500MW SOD123

The MMSZ4689T3 diode is a small but vital part. It provides a stable 5.1 foltiau. This makes it essential for many electronic tasks. We often need a steady voltage reference. This diode creates that exact 5.1V point reliably. Circuits use this reference point to control other voltages. It helps keep power supplies stable. Sensitive chips need stable power. This diode protects them.

Voltage spikes are a big problem. They can destroy components instantly. This diode acts as a safety guard. It normally blocks current flow. If the voltage jumps above 5.1V, the diode activates. It creates a safe path for the extra electricity. This extra power gets sent to ground. The protected circuit stays safe. You see this in power inputs. USB ports often use these diodes. Phones and gadgets charge safely because of them.

Signal processing needs clean voltages. Input signals can sometimes jump too high. This diode clips off anything over 5.1V. It prevents distortion or damage downstream. Think of audio inputs or sensor lines. Noise or surges get chopped off. The good signal passes through cleanly. Digital logic circuits also need protection. A stray high voltage can cause errors. This diode clamps the signal to a safe level.

Its SOD123 package is tiny. This saves precious board space. You find it packed densely on modern circuit boards. Mae'n trin 500 miliwat o bŵer. This is enough for many protection and reference jobs. Designers choose it for its specific 5.1V rating. Its size, cost, and performance make it popular. It works in power management circuits. It guards communication lines. It stabilizes voltage for microcontrollers.

Proffil Cwmni

PDDN Photoelectron Technology Co., Cyf.(sales@pddn.com) yw un o'r mentrau blaenllaw ym maes technoleg electroneg pŵer a chynhyrchion pŵer, sy'n ymwneud yn llawn â datblygu gwrthdroyddion solar， trawsnewidyddion, rheolyddion foltedd, cypyrddau dosbarthu, thyristors， modiwlau， deuodau， gwresogyddion, a dyfeisiau electronig neu led-ddargludyddion eraill. Byddwn wedi ymrwymo i ddarparu defnyddwyr o ansawdd uchel, cynhyrchion effeithlon a gwasanaeth ystyriol.

Mae'n derbyn taliad trwy Gerdyn Credyd, T/T, Undeb y Gorllewin, a Paypal. Bydd PDDN yn cludo'r nwyddau i gwsmeriaid dramor trwy FedEx, DHL, ar y môr, neu yn yr awyr. If you want high-quality MMSZ4689T3 DIODE ZENER 5.1V 500MW SOD123, anfonwch ymholiadau atom; byddwn ni yma i'ch helpu chi.

 

Dulliau Talu

L/C, T/T, Undeb gorllewinol, Paypal, Cerdyn Credyd ac ati.

 

Cludo

Ar y môr, mewn awyren, trwy fynegi, fel cais cwsmeriaid.

 

Amodau Storio

1) Storio mewn amgylchedd sych ar dymheredd ystafell.

2) Osgoi lleithder a thymheredd uchel.

3) Defnyddiwch yn syth ar ôl agor y bag pacio mewnol.

5 FAQs of MMSZ4689T3 DIODE ZENER 5.1V 500MW SOD123

What is the MMSZ4689T3 diode?
Mae'n ddeuod Zener. This means it keeps a steady voltage across its terminals when connected backwards in a circuit. It’s designed for voltage regulation and protection jobs.

What’s its voltage and power rating?
This diode regulates at 5.1 foltiau. It can safely handle up to 500 miliwat o afradu pŵer. Don’t exceed these limits. It keeps things stable.

Where do you use this diode?
Use it mainly to clamp voltage spikes or set a reference voltage level. Common spots are protecting sensitive inputs on circuits, stabilizing power supply outputs around 5 foltiau, or acting as a simple voltage reference. It’s good for basic regulation tasks.

What package is it in?
It comes in the SOD123 surface-mount package. This is a small plastic case with two leads. It fits easily onto modern circuit boards designed for automated assembly. The size saves space.

Why pick this specific Zener diode?
The 5.1V rating is very common for logic circuits needing stable 5V lines. The SOD123 package is widely used and easy to work with. The 500mW power rating offers decent protection capability for its size. It’s a reliable, standard part for basic 5V regulation needs.

(MMSZ4689T3 DIODE ZENER 5.1V 500MW SOD123)