MMSZ5221ET1 DIODE ZENER 2.4V 500MW SOD123

Introduction of MMSZ5221ET1 DIODE ZENER 2.4V 500MW SOD123

The MMSZ5221ET1 DIODE ZENER 2.4V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. A cuntrariu di i moduli isolati, MMSZ5221ET1 DIODE ZENER 2.4V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. Stu disignu simplificà a struttura di u circuitu, riduce u costu, è migliurà l'efficienza.

 

Features and Benefits of MMSZ5221ET1 DIODE ZENER 2.4V 500MW SOD123

Disegnu compactu: Perchè ùn sò micca necessarii cumpunenti di isolamentu supplementari, MMSZ5221ET1 DIODE ZENER 2.4V 500MW SOD123s are typically smaller and lighter in weight.

Alte prestazioni: A perdita d'energia ridutta per via di cumpunenti di isolamentu migliurà l'efficienza generale di cunversione.

Low Cost: I cumpunenti di isolamentu caru sò eliminati, risultatu in i costi di fabricazione più bassi.

Risposta rapida: U diodu integratu di ricuperazione rapida (FRD) pò passà rapidamente da un statu on-statu à un statu bluccatu, riducendu perdite di commutazione.

Alta affidabilità: Materiali è tecnulugia avanzati sò usati per assicurà un funziunamentu stabile ancu in ambienti duri.

Facile à stallà è mantene: Interfacce è cunnessione standardizati simplificà u prucessu di stallazione è facilitanu u mantenimentu dopu.

(MMSZ5221ET1 DIODE ZENER 2.4V 500MW SOD123)

Specification of MMSZ5221ET1 DIODE ZENER 2.4V 500MW SOD123

The MMSZ5221ET1 is a Zener diode. It provides a secure referral voltage. This diode is ranked for 2.4 volt. This voltage is its nominal Zener voltage. The actual voltage has a resistance. It can be plus or minus 5%. So the genuine voltage ranges between 2.28 volt è 2.52 volt. This precision is essential for accurate circuits.

The diode deals with an optimal power dissipation of 500 milliwatts. This is the power it can safely take in. You must not exceed this restriction. Surpassing it risks harming the part. The SOD123 surface install bundle houses this diode. This plan is extremely small. It conserves considerable room on circuit card. The SOD123 is prominent for modern electronic devices assembly. It is developed for effective automatic positioning.

This Zener diode is suitable for voltage regulation. It secures voltage spikes efficiently. It safeguards sensitive elements from overvoltage. You typically discover it shielding inputs on integrated circuits. It likewise supplies steady bias factors in analog circuits. The component functions well in power supplies. It maintains reduced voltage rails reliably. The MMSZ5221ET1 suits consumer electronics applications. It prevails in mobile gadgets. Industrial control systems likewise use this part.

Its operating temperature array is broad. It operates from -65 levels Celsius to +150 levels Celsius. This makes it robust for various environments. The diode features low leak current. This characteristic improves circuit efficiency. Excellent thermal performance comes from the SOD123 package. This assists manage warmth during operation. The MMSZ5221ET1 uses dependable performance. It is a common choice for 2.4 V guideline needs. Designers trust it for regular outcomes.

(MMSZ5221ET1 DIODE ZENER 2.4V 500MW SOD123)

Applications of MMSZ5221ET1 DIODE ZENER 2.4V 500MW SOD123

The MMSZ5221ET1 is a Zener diode. It provides a consistent 2.4 V voltage referral. This details part is available in the small SOD123 surface-mount package. Its small size fits well in modern, small electronic devices. The diode deals with as much as 500 milliwatts (mW) of power dissipation. This score is very important for its risk-free operation.

This diode works generally for voltage policy. It keeps a steady voltage throughout its terminals. When the voltage tries to exceed 2.4 V, the diode carries out heavily. This activity secures the voltage close to 2.4 V. So it shields delicate parts downstream from voltage spikes.

You discover it protecting low-voltage circuits. It’s common protecting inputs on microcontrollers or sensing units. These components typically need protection from unexpected voltage surges. U 2.4 V degree suits many low-power reasoning circuits. It secures interfaces like low-voltage serial lines.

Another vital usage is as a basic voltage reference. Circuits requiring an accurate 2.4 V factor use this diode. Offre una tensione di raccomandazione sicura. This serves in fundamental power products or sensor circuits. It supplies a low-cost method to obtain a known voltage degree.

Its SOD123 package is very popular. This makes assembly very easy using standard pick-and-place makers. The tiny impact saves important board area. Developers select it for thick circuit formats. Its efficiency is dependable for general-purpose jobs.

The diode has a tolerance of ± 5%. So the actual failure voltage varies in between 2.28 V and 2.52 V. Designers have to make up this range. Its efficiency modifications a little with temperature level. This is typical for Zener diodes. Circuits needing high precision might require extra parts.

It works for securing voltage transients. Consider occasions like electrostatic discharge (ESD). The diode promptly limits the voltage to its secure level. This avoids damages to extra costly ICs. It’s a standard foundation for circuit defense.

This diode is widely offered. It’s an affordable option for lots of styles. Its combination of 2.4 V ranking, 500mW power, and small dimension makes it flexible. It works well in battery-powered gizmos. It’s additionally found in USB peripherals and portable devices. Designers trust it for simple voltage control tasks.

Profilu di a cumpagnia

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) hè una di l'imprese principali in a tecnulugia di l'elettronica di putenza è i prudutti di l'energia, chì hè cumplettamente implicatu in u sviluppu di inverter solari， trasformatori, regulatori di tensione, armadi di distribuzione, tiristori， moduli， diodi， riscaldatori, è altri apparecchi elettronichi o semiconduttori. Seremu impegnati à furnisce l'utilizatori cù alta qualità, prudutti efficaci è serviziu attentu.

Accepta pagamentu via Carta di Creditu, T/T, Unione Occidentale, è Paypal. PDDN spedirà e merchenzie à i clienti oltremare attraversu FedEx, DHL, per mare, o per l'aria. If you want high-quality MMSZ5221ET1 DIODE ZENER 2.4V 500MW SOD123, per piacè mandateci dumande; seremu quì per aiutà vi.

 

I metudi di pagamentu

L/C, T/T, Western Union, Paypal, Carta di creditu ecc.

 

Spedizioni

Per mare, per l'aria, per espresso, cum'è i clienti dumandanu.

 

Cundizioni di almacenamiento

1) Mantene in un ambiente seccu à a temperatura di l'ambienti.

2) Evite l'umidità è a temperatura alta.

3) Aduprà immediatamente dopu l'apertura di u saccu di imballaggio internu.

5 FAQs of MMSZ5221ET1 DIODE ZENER 2.4V 500MW SOD123

What is the MMSZ5221ET1?
Hè un diodu Zener. It regulates voltage in circuits. It keeps voltage steady at a specific point. This diode is surface-mount. You find it in small electronic devices.

Chì voltage regula?
It regulates at 2.4 volt. Questu hè u so voltage Zener. If voltage tries to go above 2.4V, the diode conducts. It clamps the voltage down to 2.4V. This protects sensitive parts.

Quantu putere pò trattà?
It can handle 500 milliwatts (0.5 watts). This is its maximum power dissipation. Don’t exceed this limit. Too much power will damage the diode. Check the current flowing through it.

What package does it use?
It comes in an SOD-123 surface mount package. This package is small. It saves space on circuit boards. You solder it directly onto the PCB. It’s common for automated assembly.

Induve hè stu diodu tipicamente usatu?
It’s used for voltage regulation. It provides a stable 2.4V reference. It protects circuits from overvoltage. Common uses include protecting inputs on microcontrollers. It’s also used in power supplies.

(MMSZ5221ET1 DIODE ZENER 2.4V 500MW SOD123)