MMSZ5246BT3 DIODE ZENER 16V 500MW SOD123

Introduction of MMSZ5246BT3 DIODE ZENER 16V 500MW SOD123

The MMSZ5246BT3 DIODE ZENER 16V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Dili sama sa nahilit nga mga module, MMSZ5246BT3 DIODE ZENER 16V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. Kini nga disenyo nagpasimple sa istruktura sa sirkito, makapamenos sa gasto, ug pagpalambo sa efficiency.

 

Features and Benefits of MMSZ5246BT3 DIODE ZENER 16V 500MW SOD123

Compact nga disenyo: Tungod kay wala’y kinahanglan nga dugang nga mga sangkap sa pag-inusara, MMSZ5246BT3 DIODE ZENER 16V 500MW SOD123s are typically smaller and lighter in weight.

Taas nga performance: Ang pagkunhod sa pagkawala sa enerhiya tungod sa pagkalainlain nga mga sangkap nagpauswag sa kinatibuk-ang pagkaayo sa pagkakabig.

Ubos nga Gasto: Ang mga mahal nga sangkap sa pag-inusara giwagtang, miresulta sa ubos nga gasto sa paggama.

Paspas nga Tubag: Ang built-in nga Fast Recovery Diode (Si FRD) mahimong dali nga mobalhin gikan sa usa ka on-state ngadto sa usa ka blocking state, pagkunhod sa switching pagkawala.

Taas nga Kasaligan: Ang mga advanced nga materyales ug teknolohiya gigamit aron masiguro ang lig-on nga operasyon bisan sa mapintas nga mga palibot.

Sayon sa pag-instalar ug pagmentinar: Ang standardized nga mga interface ug mga koneksyon nagpasimple sa proseso sa pag-instalar ug nagpadali sa pagmentinar sa ulahi.

(MMSZ5246BT3 DIODE ZENER 16V 500MW SOD123)

Specification of MMSZ5246BT3 DIODE ZENER 16V 500MW SOD123

The MMSZ5246BT3 is a Zener diode. Gi-regulate niini ang boltahe. This part provides a stable 16-volt reference. Its nominal Zener voltage is 16V. You measure this voltage at the test point. The test current is 5mA. The voltage tolerance is tight. It is ±5%. This means the actual voltage stays between 15.2V and 16.8V. This accuracy is important for stable circuits.

It handles significant power. The maximum power dissipation is 500 milliwatts. This power rating is for continuous operation. The SOD123 surface-mount package houses the diode. This package is very small. It saves valuable board space. The SOD123 is common. It is easy to use in automated assembly processes. Two leads connect the diode to the circuit board.

The MMSZ5246BT3 works in reverse breakdown mode. Normal diodes block reverse current. This Zener diode conducts reverse current at its specified voltage. This action clamps the voltage across it. It prevents voltage spikes from damaging sensitive components. It protects circuits from overvoltage events. It is ideal for voltage regulation tasks. Use it to set a fixed voltage level. It works well in power supplies. It stabilizes voltage references. It protects input pins on ICs.

Its small size is a major advantage. The SOD123 package fits densely packed designs. The 500mW rating offers good protection capability. It handles typical surges. The 16V rating suits many common digital circuits. These circuits often use 12V or 15V supplies. This diode provides reliable overvoltage protection for them. It is a cost-effective solution. It is readily available. Designers trust this component for basic regulation. It ensures stable operation. It guards against unexpected voltage increases.

(MMSZ5246BT3 DIODE ZENER 16V 500MW SOD123)

Applications of MMSZ5246BT3 DIODE ZENER 16V 500MW SOD123

This MMSZ5246BT3 Zener diode handles 16 boltahe. Nagdumala kini 500 milliwatts sa gahum. Its small SOD123 package fits tight spaces easily. This diode is vital for steady voltage in many circuits.

It excels at keeping voltage stable at 16 boltahe. If voltage climbs too high, the Zener diode activates. It pulls extra current down to ground. This action clamps the voltage firmly at 16 boltahe. Circuits need this stable reference point. It protects sensitive parts from voltage changes. Power supplies use it often for this job. It ensures other components get only the voltage they need.

This diode also guards against sudden voltage spikes. Surges happen often. They come from power glitches or static electricity. The MMSZ5246BT3 reacts very fast. It stops these spikes before they harm transistors or ICs. Place it near the input of a circuit. It protects the whole system. USB ports and chargers benefit from this protection. Sensor inputs need it too.

Its small SOD123 size is a big plus. Modern electronics are incredibly compact. This tiny diode fits easily onto crowded circuit boards. Designers save valuable space. It works reliably in battery-powered gadgets. Its low cost makes it a practical choice for many projects.

You find it in voltage regulators for microcontrollers. It provides a stable 16V point for feedback circuits. Power management units use it for overvoltage protection. Automotive electronics rely on it for surge suppression. Signal lines use it to block noise. It’s a fundamental part for reliable circuit design needing precise 16V control.

Profile sa Kompanya

Ang PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) mao ang usa sa mga nag-unang negosyo sa gahum electronics teknolohiya ug gahum produkto, nga bug-os nga nalambigit sa pagpalambo sa solar inverters， mga transformer, mga regulator sa boltahe, mga kabinet sa pag-apod-apod, mga thyristor， mga modulo， mga diode， mga heater, ug uban pang mga electronic device o semiconductor. Kami komitado sa paghatag sa mga tiggamit og taas nga kalidad, episyente nga mga produkto ug mahunahunaon nga serbisyo.

Gidawat niini ang bayad pinaagi sa Credit Card, T/T, Kasadpang Unyon, ug Paypal. Ipadala sa PDDN ang mga butang ngadto sa mga kustomer sa gawas sa nasud pinaagi sa FedEx, DHL, pinaagi sa dagat, o pinaagi sa hangin. If you want high-quality MMSZ5246BT3 DIODE ZENER 16V 500MW SOD123, palihog ipadala kanamo ang mga pangutana; ania kami aron sa pagtabang kanimo.

 

Mga Pamaagi sa Pagbayad

L/C, T/T, Western Union, Paypal, Credit Card ug uban pa.

 

Pagpadala

Sa dagat, pinaagi sa hangin, pinaagi sa express, ingon sa gihangyo sa mga kustomer.

 

Mga Kondisyon sa Pagtipig

1) Tipigi sa uga nga palibot sa temperatura sa lawak.

2) Likayi ang basa ug taas nga temperatura.

3) Gamita dayon human maablihan ang sulod nga packing bag.

5 FAQs of MMSZ5246BT3 DIODE ZENER 16V 500MW SOD123

Unsa ang gibuhat niini nga diode?
This diode keeps voltage steady at 16 boltahe. It lets current flow backwards when voltage hits 16V. Kini nanalipod sa sensitibo nga mga bahin sa imong sirkito.

How exact is the 16V rating?
The voltage isn’t perfect 16V every time. It can be a little higher or lower. Check the datasheet for the exact range. It’s usually pretty close.

Where do people use this diode?
Use it for voltage regulation. It sets a stable reference point. It also protects circuits from voltage spikes. Common spots are power supplies and protecting input pins.

What does the 500mW rating mean?
This number tells you the most power it can handle safely. 500mW equals half a watt. Exceeding this burns out the diode. Always check your circuit’s power.

Can I use a different Zener diode?
Tingali. The voltage must match your need. The power rating must be high enough. The SOD123 package size matters for fitting on your board. Check the specs first.

(MMSZ5246BT3 DIODE ZENER 16V 500MW SOD123)