MMSZ5237B DIODE ZENER 8.2V 500MW SOD123

Introduction of MMSZ5237B DIODE ZENER 8.2V 500MW SOD123

The MMSZ5237B DIODE ZENER 8.2V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Dili sama sa nahilit nga mga module, MMSZ5237B DIODE ZENER 8.2V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. Kini nga disenyo nagpasimple sa istruktura sa sirkito, makapamenos sa gasto, ug pagpalambo sa efficiency.

 

Features and Benefits of MMSZ5237B DIODE ZENER 8.2V 500MW SOD123

Compact nga disenyo: Tungod kay wala’y kinahanglan nga dugang nga mga sangkap sa pag-inusara, MMSZ5237B DIODE ZENER 8.2V 500MW SOD123s are typically smaller and lighter in weight.

Taas nga performance: Ang pagkunhod sa pagkawala sa enerhiya tungod sa pagkalainlain nga mga sangkap nagpauswag sa kinatibuk-ang pagkaayo sa pagkakabig.

Ubos nga Gasto: Ang mga mahal nga sangkap sa pag-inusara giwagtang, miresulta sa ubos nga gasto sa paggama.

Paspas nga Tubag: Ang built-in nga Fast Recovery Diode (Si FRD) mahimong dali nga mobalhin gikan sa usa ka on-state ngadto sa usa ka blocking state, pagkunhod sa switching pagkawala.

Taas nga Kasaligan: Ang mga advanced nga materyales ug teknolohiya gigamit aron masiguro ang lig-on nga operasyon bisan sa mapintas nga mga palibot.

Sayon sa pag-instalar ug pagmentinar: Ang standardized nga mga interface ug mga koneksyon nagpasimple sa proseso sa pag-instalar ug nagpadali sa pagmentinar sa ulahi.

(MMSZ5237B DIODE ZENER 8.2V 500MW SOD123)

Specification of MMSZ5237B DIODE ZENER 8.2V 500MW SOD123

This diode is the MMSZ5237B. It’s a Zener diode. Its primary work is voltage policy. It keeps a stable voltage of 8.2 boltahe. This occurs when it operates in reverse failure. Nagdumala kini hangtod sa 500 milliwatts sa gahum. This power rating is critical. It informs you just how much power the diode can securely dissipate. The plan kind is SOD-123. This is a very little surface-mount bundle. It conserves space on motherboard. It’s common for contemporary electronics.

The nominal Zener voltage is 8.2 V. But remember, actual voltage varies slightly. The tolerance is ± 5%. So the real voltage might be in between 7.79 V ug 8.61 V. You need to know this for precise designs. The diode handles a maximum reverse current. This existing is defined at the examination voltage. The test voltage is usually higher than 8.2 V. Check the datasheet for exact values. There’s likewise an optimum Zener insusceptibility. This resistance is measured at a particular test current. A reduced insusceptibility is normally much better. It indicates the diode manages voltage better.

This diode benefits protecting delicate components. It secures voltage spikes. It avoids damages from overvoltage. It’s typically used in power supplies. It provides a stable referral voltage. You see it in customer electronic devices. It’s utilized in communication devices. It fits auto applications also. Its tiny size makes it versatile. It works well in battery-powered gadgets. It aids manage power effectively.

Always think about the operating temperature level. The power ranking relies on temperature. The diode derates over 25 ° C. This suggests its power handling drops as it obtains hotter. You need to make up this in your design. Installing matters. Make sure good thermal administration. The SOD-123 plan has thermal restrictions. Don’t surpass the joint temperature level. Inspect the optimum onward voltage too. This is essential if the diode sees onward bias. It’s usually around 1V at reduced currents. Leak current is little in ahead prejudice. However it exists. Know the reverse leak specs. It’s generally very reduced listed below the break down factor.

(MMSZ5237B DIODE ZENER 8.2V 500MW SOD123)

Applications of MMSZ5237B DIODE ZENER 8.2V 500MW SOD123

The MMSZ5237B is a Zener diode. Gikontrol niini ang boltahe sa 8.2 boltahe. It manages as much as 500 milliwatts sa gahum. It comes in a small SOD123 bundle. This size is good for conserving space on motherboard. This diode works in several electronic circuits.

One primary job is voltage guideline. It maintains a constant 8.2 volts throughout its terminals. It does this also if the input voltage transforms a little. It functions by performing added present when the voltage gets too high. This activity clamps the voltage down. It secures sensitive parts downstream. You locate it in power products. It provides a stable reduced voltage factor.

Another key use is overvoltage security. Voltage spikes can damage circuits. This diode assists stop that. It attaches between the signal line and ground. Normally, it does nothing. If a spike presses the voltage above 8.2 boltahe, the diode performs. It shunts the unsafe spike to ground. This shields various other parts. It prevails on input or outcome lines.

It also offers well as a voltage referral. Some circuits need an exact voltage to contrast against. Ang 8.2 V level from this diode is stable. Circuits utilize this steady factor for measurements. It works in analog-to-digital converters. It operates in sensing unit interfaces. It functions where accuracy matters.

The 500mW power score is important. It implies the diode can deal with an affordable quantity of present. The SOD123 plan is easy to position on boards. It deals with conventional soldering processes. This makes it useful for lots of styles. Engineers select it for its dependability and dimension. It is a great selection for setting 8.2 V.

Profile sa Kompanya

Ang PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) mao ang usa sa mga nag-unang negosyo sa gahum electronics teknolohiya ug gahum produkto, nga bug-os nga nalambigit sa pagpalambo sa solar inverters， mga transformer, mga regulator sa boltahe, mga kabinet sa pag-apod-apod, mga thyristor， mga modulo， mga diode， mga heater, ug uban pang mga electronic device o semiconductor. Kami komitado sa paghatag sa mga tiggamit og taas nga kalidad, episyente nga mga produkto ug mahunahunaon nga serbisyo.

Gidawat niini ang bayad pinaagi sa Credit Card, T/T, Kasadpang Unyon, ug Paypal. Ipadala sa PDDN ang mga butang ngadto sa mga kustomer sa gawas sa nasud pinaagi sa FedEx, DHL, pinaagi sa dagat, o pinaagi sa hangin. If you want high-quality MMSZ5237B DIODE ZENER 8.2V 500MW SOD123, palihog ipadala kanamo ang mga pangutana; ania kami aron sa pagtabang kanimo.

 

Mga Pamaagi sa Pagbayad

L/C, T/T, Western Union, Paypal, Credit Card ug uban pa.

 

Pagpadala

Sa dagat, pinaagi sa hangin, pinaagi sa express, ingon sa gihangyo sa mga kustomer.

 

Mga Kondisyon sa Pagtipig

1) Tipigi sa uga nga palibot sa temperatura sa lawak.

2) Likayi ang basa ug taas nga temperatura.

3) Gamita dayon human maablihan ang sulod nga packing bag.

5 FAQs of MMSZ5237B DIODE ZENER 8.2V 500MW SOD123

What is the voltage rating of the MMSZ5237B diode?
This diode is an 8.2V Zener diode. That means its designed voltage is 8.2 boltahe. This voltage is called the Zener voltage. It’s the key point where the diode starts regulating voltage.

How much power can the MMSZ5237B handle?
The diode can handle up to 500 milliwatts sa gahum. This is its maximum power dissipation. You must not exceed this limit. Exceeding it risks damaging the diode. Good heat management helps it stay within this limit.

What package does the MMSZ5237B diode use?
It comes in the SOD123 surface-mount package. This package is very small. Its size makes it good for compact circuit boards. The small size saves space on your PCB layout.

Where is the MMSZ5237B diode typically used?
This diode is mainly used for voltage regulation. It holds a steady 8.2V in a circuit. It protects sensitive parts from voltage spikes. You find it protecting inputs or outputs. It’s common in power supplies and signal lines.

Does polarity matter when installing the MMSZ5237B?
Oo, polarity is critical. Zener diodes are polarized parts. The cathode end must connect correctly. The cathode is marked with a stripe. Installing it backwards prevents it from working right. It might even cause circuit problems. Always check the stripe orientation.

(MMSZ5237B DIODE ZENER 8.2V 500MW SOD123)