MMSZ5232B-7 DIODE ZENER 5.6V 500MW SOD123

Introduction of MMSZ5232B-7 DIODE ZENER 5.6V 500MW SOD123

The MMSZ5232B-7 DIODE ZENER 5.6V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Dili sama sa nahilit nga mga module, MMSZ5232B-7 DIODE ZENER 5.6V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. Kini nga disenyo nagpasimple sa istruktura sa sirkito, makapamenos sa gasto, ug pagpalambo sa efficiency.

 

Features and Benefits of MMSZ5232B-7 DIODE ZENER 5.6V 500MW SOD123

Compact nga disenyo: Tungod kay wala’y kinahanglan nga dugang nga mga sangkap sa pag-inusara, MMSZ5232B-7 DIODE ZENER 5.6V 500MW SOD123s are typically smaller and lighter in weight.

Taas nga performance: Ang pagkunhod sa pagkawala sa enerhiya tungod sa pagkalainlain nga mga sangkap nagpauswag sa kinatibuk-ang pagkaayo sa pagkakabig.

Ubos nga Gasto: Ang mga mahal nga sangkap sa pag-inusara giwagtang, miresulta sa ubos nga gasto sa paggama.

Paspas nga Tubag: Ang built-in nga Fast Recovery Diode (Si FRD) mahimong dali nga mobalhin gikan sa usa ka on-state ngadto sa usa ka blocking state, pagkunhod sa switching pagkawala.

Taas nga Kasaligan: Ang mga advanced nga materyales ug teknolohiya gigamit aron masiguro ang lig-on nga operasyon bisan sa mapintas nga mga palibot.

Sayon sa pag-instalar ug pagmentinar: Ang standardized nga mga interface ug mga koneksyon nagpasimple sa proseso sa pag-instalar ug nagpadali sa pagmentinar sa ulahi.

(MMSZ5232B-7 DIODE ZENER 5.6V 500MW SOD123)

Specification of MMSZ5232B-7 DIODE ZENER 5.6V 500MW SOD123

The MMSZ5232B-7 is a Zener diode. Its main work is voltage regulation. This diode maintains a steady voltage throughout itself when reverse-biased. Its particular Zener voltage is 5.6 boltahe. This implies it begins conducting considerably in the reverse direction around 5.6 V. Designers use it to secure voltages or give steady reference points.

Nagdumala kini hangtod sa 500 milliwatts sa power dissipation. This power score is essential. It informs you how much energy the diode can securely absorb as warm. Surpassing this limitation dangers damaging the element. Always think about the operating temperature. The power rating lowers as ambient temperature level increases. Check the datasheet derating curves.

The component is available in a SOD123 surface-mount bundle. This is a very typical, little plastic package. It has two leads. The SOD123 footprint is basic. It conserves considerable space on motherboard compared to older through-hole diodes. This makes it optimal for modern electronics.

Ang “B” in the part number indicates tighter resistance on the Zener voltage. Its voltage resistance is typically ± 2%. This is better than the conventional ± 5% resistance. You obtain extra precise voltage law with this version. Ang “-7” suffix commonly connects to tape and reel packaging for automated assembly.

This diode is widely utilized. You locate it safeguarding delicate inputs from overvoltage spikes. It regulates low-voltage power supply rails. It offers steady prejudicing voltages for transistors. Its small size suits mobile tools. Ang 5.6 V ranking fits usual reasoning degrees and low-power circuits. The MMSZ5232B-7 provides trusted efficiency for these jobs.

(MMSZ5232B-7 DIODE ZENER 5.6V 500MW SOD123)

Applications of MMSZ5232B-7 DIODE ZENER 5.6V 500MW SOD123

The MMSZ5232B-7 is a Zener diode. It provides a steady 5.6 V recommendation voltage. This diode handles as much as 500 milliwatts sa gahum. Its small SOD123 package fits quickly on motherboard. Developers select it for numerous essential work.

Voltage law is a primary use. Circuits typically require secure voltage degrees. This diode preserves a constant 5.6 V result. It clamps the voltage across its terminals. This safeguards delicate elements downstream. You locate it regulating power for microcontrollers or sensors.

Overvoltage defense is an additional crucial feature. Voltage surges damages electronic devices. This diode acts as a shunt. Extreme voltage over 5.6 V makes it conduct. It draws away the damaging surge to ground. This safeguards inputs on USB ports or interaction lines. It avoids damages from static power or inductive kicks.

Offering an accurate voltage reference is its 3rd major function. Some circuits need a well-known steady voltage point. This diode’s 5.6 V malfunction is trustworthy. It serves as a recommendation for analog-to-digital converters. It sets thresholds in comparator circuits or sensor user interfaces. Its security is necessary for accurate measurements.

Its tiny dimension is a huge benefit. The SOD123 bundle conserves area. This is crucial in portable gadgets like phones or wearables. It manages the power needs of lots of mobile devices. Designers use it where board room is restricted.

The diode works well in battery-powered systems. Its low leakage existing preserves power. This helps extend battery life. It incorporates smoothly into power management circuits. Its performance is consistent over a useful temperature range. This reliability makes it a preferred selection.

You see it securing data lines. It guards I/O pins on silicon chips. It maintains power rails feeding ICs. It gives reference points in power supplies. Its adaptability and small form variable make sure widespread usage. It’s a basic part for managing 5.6 V in modern electronic devices.

Profile sa Kompanya

Ang PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) mao ang usa sa mga nag-unang negosyo sa gahum electronics teknolohiya ug gahum produkto, nga bug-os nga nalambigit sa pagpalambo sa solar inverters， mga transformer, mga regulator sa boltahe, mga kabinet sa pag-apod-apod, mga thyristor， mga modulo， mga diode， mga heater, ug uban pang mga electronic device o semiconductor. Kami komitado sa paghatag sa mga tiggamit og taas nga kalidad, episyente nga mga produkto ug mahunahunaon nga serbisyo.

Gidawat niini ang bayad pinaagi sa Credit Card, T/T, Kasadpang Unyon, ug Paypal. Ipadala sa PDDN ang mga butang ngadto sa mga kustomer sa gawas sa nasud pinaagi sa FedEx, DHL, pinaagi sa dagat, o pinaagi sa hangin. If you want high-quality MMSZ5232B-7 DIODE ZENER 5.6V 500MW SOD123, palihog ipadala kanamo ang mga pangutana; ania kami aron sa pagtabang kanimo.

 

Mga Pamaagi sa Pagbayad

L/C, T/T, Western Union, Paypal, Credit Card ug uban pa.

 

Pagpadala

Sa dagat, pinaagi sa hangin, pinaagi sa express, ingon sa gihangyo sa mga kustomer.

 

Mga Kondisyon sa Pagtipig

1) Tipigi sa uga nga palibot sa temperatura sa lawak.

2) Likayi ang basa ug taas nga temperatura.

3) Gamita dayon human maablihan ang sulod nga packing bag.

5 FAQs of MMSZ5232B-7 DIODE ZENER 5.6V 500MW SOD123

What does the MMSZ5232B-7 Zener diode do?
It keeps a steady voltage. It controls voltage at 5.6V in circuits. This protects sensitive parts from too much voltage.

What does the 5.6V rating mean?
This is the voltage it controls. The diode holds the voltage near 5.6V when working right. The actual voltage might be between 5.32V and 5.88V.

Why is the 500mW rating important?
This is the most power it can safely handle. You must not exceed 500 milliwatts. Ang paglabaw niini makadaot sa diode.

What is SOD123?
SOD123 is the package type. It’s the small plastic case the diode comes in. This size is common for surface mounting on circuit boards.

How do I connect it in a circuit?
Pay attention to polarity. Ang katapusan sa cathode (gimarkahan og usa ka stripe) connects to the positive side. Connecting it backwards stops it working as a Zener diode.

(MMSZ5232B-7 DIODE ZENER 5.6V 500MW SOD123)