MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123

Introduction of MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123

The MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. A diferència dels mòduls aïllats, MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. Aquest disseny simplifica l'estructura del circuit, redueix el cost, i millora l'eficiència.

 

Features and Benefits of MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123

Disseny compacte: Perquè no calen components d'aïllament addicionals, MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123s are typically smaller and lighter in weight.

Alt rendiment: La reducció de la pèrdua d'energia a causa dels components d'aïllament millora l'eficiència global de conversió.

Baix Cost: S'eliminen els costosos components d'aïllament, resultant en menors costos de fabricació.

Resposta ràpida: El díode de recuperació ràpida integrat (FRD) pot canviar ràpidament d'un estat encès a un estat de bloqueig, reduir les pèrdues de commutació.

Alta fiabilitat: S'utilitzen materials i tecnologies avançades per garantir un funcionament estable fins i tot en entorns durs.

Fàcil d'instal·lar i mantenir: Les interfícies i connexions estandarditzades simplifiquen el procés d'instal·lació i faciliten el manteniment posterior.

(MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123)

Specification of MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123

The MMSZ4692ET1 is a Zener diode. It provides stable voltage guideline. Its primary job is maintaining a consistent 6.8 volts. This takes place when it runs in reverse malfunction. Consider it as a pressure safety valve for electrical power.

This certain diode manages a maximum power dissipation of 500 miliwatts. This ranking is very important. It tells you how much power the diode can securely manage. Exceeding this limitation threats damaging the part. Keep its power use listed below 500mW.

The ranked Zener voltage is 6.8 V. There is a resistance. The actual voltage might be in between 6.46 V and 7.14 V. This is a ± 5% tolerance. Expect this variant under examination problems. The examination current is usually 5mA.

Leakage current is low. At voltages listed below 6.8 V, really little reverse existing flows. The maximum leak is 5 microamps at 4V. This is good for efficiency. Less power is wasted when the diode is off.

The diode can be found in a SOD123 surface-mount package. This is extremely little. It conserves room on circuit card. The package is made for automated setting up. It prevails for modern electronics manufacturing.

The tool manages a broad temperature level variety. It works from -65 °C a +150 °C. This matches lots of environments. The Zener voltage adjustments slightly with temperature. The temperature coefficient is around +3 mV/ ° C for this voltage. This indicates the voltage enhances a little as it obtains hotter.

Common usages involve safeguarding circuits. It clamps voltage spikes. It maintains power supply outcomes. It supplies a reference voltage. You usually find it protecting sensitive inputs like CMOS logic gates. It stops voltage from going too expensive. It is also used in fundamental power regulation circuits. The 6.8 V degree is useful for lots of low-voltage digital systems.

(MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123)

Applications of MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123

This MMSZ4692ET1 diode is a Zener kind. It provides a stable 6.8 volts. Designers pick this diode for voltage law. It maintains voltages stable in lots of circuits. Power materials require this security. Battery-powered tools need it too. Es gestiona 500 miliwatts de potència. This power rating fits typical electronic devices. It protects sensitive components. It quits voltage spikes from causing damages. Inputs on microcontrollers are susceptible. Sensor inputs can be delicate. This diode shields them. It clamps the voltage safely. It prevents signals from going too high. It prevents signals from going also low. It acts like a voltage reference. Circuits compare voltages against it. Analog-to-digital converters require accurate recommendations. This diode offers a reliable 6.8 punt V. Its little SOD123 plan conserves room. Circuit card are commonly crowded. This little dimension fits quickly. Surface-mount assembly is typical. It functions well for portable gadgets. Automotive electronics utilize components such as this. Industrial controls need reputable components. Consumer electronic devices gain from its dimension. It takes care of modest power degrees properly. Designers trust its steady break down voltage. It starts conducting dependably at 6.8 V backwards. This predictable habits is essential. It makes sure consistent circuit procedure. It supplies an easy service for guideline. It gives an inexpensive option for security. It supplies a specific referral voltage. The MMSZ4692ET1 is a functional component.

Perfil de l'empresa

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) és una de les empreses líders en tecnologia d'electrònica de potència i productes d'energia, que participa plenament en el desenvolupament d'inversors solars， transformadors, reguladors de tensió, armaris de distribució, tiristors， mòduls， díodes， escalfadors, i altres dispositius electrònics o semiconductors. Ens comprometrem a oferir als usuaris una alta qualitat, productes eficients i servei atent.

Accepta pagament amb targeta de crèdit, T/T, Unió Oest, i Paypal. PDDN enviarà la mercaderia als clients a l'estranger a través de FedEx, DHL, per mar, o per aire. If you want high-quality MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123, si us plau, envieu-nos consultes; estarem aquí per ajudar-te.

 

Mètodes de pagament

L/C, T/T, Western Union, Paypal, Targeta de crèdit, etc.

 

Enviament

Per mar, per aire, per express, tal com ho demanen els clients.

 

Condicions d'emmagatzematge

1) Emmagatzemar en un ambient sec a temperatura ambient.

2) Eviteu la humitat i les altes temperatures.

3) Feu servir immediatament després d'obrir la bossa d'embalatge interior.

5 FAQs of MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123

What does the MMSZ4692ET1 Zener diode do?
It keeps a steady voltage. It makes sure 6.8 volts stays constant in a circuit. This protects parts from voltage spikes. It acts like a pressure relief valve for electricity.

How precise is the 6.8V rating?
It’s not perfectly exact. The actual voltage changes slightly. It depends on the current flowing through it. It also changes with temperature. Expect it between about 6.46 volts and 7.14 volts typically.

What does the 500mW power rating mean?
This is its maximum power limit. You cannot exceed 500 miliwatts. Calculate power by multiplying voltage drop across it by the current through it. Keep this number below 500mW always.

How do I connect it? Correct polarity matters?
Sí, polarity is critical. Connect it backwards compared to a normal diode. Look for the cathode stripe on the SOD123 package body. Point this stripe towards the higher voltage point in your circuit.

Does heat affect this diode?
Sí, heat matters a lot. Power dissipation creates heat. Too much heat damages the diode. The 500mW rating assumes proper cooling. Ensure the ambient temperature stays within the specified range. Provide enough airflow if needed.

(MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123)