1200V fast recovery epitaxial diode module

Inleiding tot tiristordiodemodules

Tiristor diode modules, dikwels na verwys as tiristors, is 'n tipe halfgeleiertoestel wat hoofsaaklik gebruik word vir die beheer en skakeling van elektriese krag in verskeie toepassings. Hulle dien as beheerde skakelaars, laat stroom vloei wanneer dit deur 'n klein heksein geaktiveer word. Sodra aangeskakel, hulle bly gelei totdat die stroom deur hulle onder 'n sekere drempel val of die rigting van die stroom omgekeer word.

'n Tiristormodule bestaan ​​tipies uit veelvuldige tiristors wat saam verpak is om hoër strome of spannings te hanteer as wat 'n enkele komponent kan hanteer. Hierdie modules kan in 'n verskeidenheid konfigurasies gevind word, insluitend SCR (Silikon beheerde gelykrigter), TRIAK, en GTO (Hek afskakel) tiristors, elk ontwerp vir spesifieke tipes kragbeheertake.

Kenmerke en voordele van Thyristor Diode Modules

1. Hoë krag hanteringskapasiteit:
   Tiristormodules is in staat om hoë vlakke van krag te hanteer, wat hulle geskik maak vir industriële toepassings wat robuuste en betroubare kragbestuuroplossings vereis.

2. Doeltreffende kragbeheer:
   Tiristors bied presiese beheer oor die krag wat aan 'n las gelewer word. Deur die tydsberekening van die hekpuls te beheer, dit is moontlik om die hoeveelheid krag wat oorgedra word aan te pas, wat veral nuttig is in AC-kragbeheertoepassings soos verduistering van ligte of spoedbeheer van motors.

3. Lae geleidingsverliese:
   Wanneer dit heeltemal aan is, tiristors het lae voorwaartse spanningsval, lei tot minimale kragverliese tydens geleiding. Hierdie doeltreffendheid dra by tot laer bedryfstemperature en verbeterde energiedoeltreffendheid.

4. Robuuste konstruksie:
   Ontwerp vir moeilike omgewings, tiristormodules het duursame verpakking wat meganiese spanning kan weerstaan, temperatuur skommelinge, en ander omgewingsfaktore tipies in industriële omgewings.

5. Kompakte ontwerp:
   Ten spyte van hul vermoë om aansienlike mag te hanteer, moderne tiristormodules is kompak, ruimtebesparende ontwerpe in toerusting moontlik te maak waar grootte en gewig kritieke oorwegings is.

6. Koste-effektiewe oplossing:
   Tiristormodules bied 'n ekonomiese manier om kragtige skakel- en beheerfunksies te implementeer in vergelyking met alternatiewe tegnologieë wat dalk nie so doeltreffend is nie of meer kan kos per eenheid krag hanteer.

7. Eenvoudige snellermeganisme:
   Tiristors benodig slegs 'n klein hekstroom om aan te skakel, wat die ontwerp van beheerkringe vereenvoudig. Die snellermeganisme kan maklik in bestaande stelsels geïntegreer word met minimale bykomende komponente.

8. Wye reeks toepassings:
   Van motorbeheer en kragtoevoer tot sweismasjiene en vastrapstelsels, tiristormodules vind toepassing oor 'n wye spektrum van nywerhede as gevolg van hul veelsydige eienskappe.

9. Oorstroombeskerming:
   Baie tiristormodules is toegerus met ingeboude beskermingsfunksies teen oorstroomtoestande, beskerm beide die toestel self en gekoppelde vragte teen potensiële skade.

10. Vinnige skakelsnelhede:
    Gevorderde tiristormodules kan toestande vinnig verander, wat voordelig is in toepassings wat vinnige reaksietye of gereelde skakelingsiklusse vereis sonder om prestasie in te boet.

(1200V fast recovery epitaxial diode module)

Specification of 1200V fast recovery epitaxial diode module

The 1200V quick recovery epitaxial diode module is made for high-power applications needing effective switching and dependable efficiency. This component makes use of advanced epitaxial modern technology to make sure quick recuperation times, reducing energy loss during procedure. It handles as much as 1200 volts reverse voltage, making it suitable for industrial systems like motor drives, krag materiaal, and renewable resource inverters.

The diode framework consists of several chips set up in a small component. This arrangement boosts present distribution and thermal administration. Each chip features a slim epitaxial layer, boosting changing rate while maintaining reduced onward voltage decline. The module’s reduced leakage current ensures marginal power waste during off-states.

Electrical specifications highlight a high rise current capacity, permitting the module to endure abrupt overloads without damages. Regular onward voltage is around 1.6 V at rated present, guaranteeing efficient power transfer. Reverse healing time is kept under 50 millisekondes, crucial for reducing changing losses in high-frequency circuits.

Thermal performance is a priority. The component integrates a baseplate made from materials like copper or light weight aluminum for reliable warm dissipation. This design maintains operating temperature levels secure also under heavy lots. Isolation voltage between terminals and the baseplate surpasses 2500V, meeting safety requirements for industrial equipment.

Applications consist of use in UPS systems, welding devices, and electrical car charging terminals. The component’s robust building and construction withstands resonance and thermal cycling, typical in rough environments. It operates reliably throughout a temperature variety of -40 °C tot 150 °C, making certain functionality in extreme conditions.

Security accreditations such as UL and IEC conformity are consisted of. These confirm the component fulfills worldwide requirements for electric security and ecological sturdiness. Choices for custom setups are offered, permitting modifications to present rankings or mounting designs based on particular job needs.

Lasting dependability is ensured with rigorous testing. This consists of high-temperature reverse prejudice trials and thermal shock assessments. The module’s design minimizes electro-magnetic disturbance, critical for keeping signal stability in delicate digital systems. Upkeep demands are low due to the use of corrosion-resistant products in critical parts.

(1200V fast recovery epitaxial diode module)

Applications of 1200V fast recovery epitaxial diode module

The 1200V quick recuperation epitaxial diode component is developed for high-power applications requiring efficient changing and reduced energy loss. It works in systems where quick healing times and high voltage handling are vital. This diode module is built to handle quick modifications in present and voltage, making it optimal for requiring industrial settings.

One significant use is in commercial motor drives. These systems require exact control of rate and torque. The diode’s quick healing decreases changing losses, enhancing efficiency. It also decreases warm generation, prolonging the lifespan of motor drive parts. Factories rely upon this dependability to maintain assembly line running smoothly.

Renewable energy systems like solar inverters and wind generators gain from this diode. Solar arrangements transform DC power to air conditioning for grid use. The component’s high-voltage capacity ensures steady power transfer also under fluctuating conditions. Its reduced opposite recuperation cost cuts energy waste, improving overall system efficiency. Wind wind turbines use it to deal with uneven power inputs caused by altering wind rates.

Electric vehicle (EV) billing terminals make use of these diodes for reliable power conversion. Rapid billing calls for rapid switching to handle high currents securely. The module’s longevity sustains frequent fee cycles without deterioration. EVs themselves make use of similar technology in onboard chargers and battery management systems to optimize power flow.

Power materials for clinical tools demand accuracy and safety and security. The diode’s reduced sound and high efficiency ensure steady operation of devices like MRI devices or X-ray generators. It prevents voltage spikes that could damage sensitive components. Data facilities also utilize these components in UPS systems to safeguard web servers from power disruptions.

Industrial welding makers rely upon the diode for regular arc security. The quick recovery time enables specific control of welding currents, boosting joint quality. Its tough style holds up against high temperatures and electric stress usual in heavy-duty welding.

Telecommunications framework utilizes the diode in power converters for base terminals. It maintains signal dependability by making sure steady power delivery even during grid fluctuations. The component’s small size helps save area in congested devices closets.

Maatskappy profiel

PDDN Photoelectron Technology Co., Bpk.(sales@pddn.com) is een van die voorste ondernemings in kragelektronika-tegnologie en kragprodukte, wat ten volle betrokke is by die ontwikkeling van sonkrag-omsetters， transformators, spanning reguleerders, verspreidingskaste, tiristors， modules， diodes， verwarmers, en ander elektroniese toestelle of halfgeleiers. Ons sal daartoe verbind wees om gebruikers van hoë gehalte te voorsien, doeltreffende produkte en bedagsame diens.

Dit aanvaar betaling via kredietkaart, T/T, Wes Unie, en Paypal. PDDN sal die goedere aan kliënte oorsee stuur deur FedEx, DHL, deur die see, of per lug. If you want high-quality 1200V fast recovery epitaxial diode module, stuur asseblief vir ons navrae; ons sal hier wees om jou te help.

Betaalmetodes

L/C, T/T, Western Union, Paypal, Kredietkaart ens.

Versending

By see, deur die lug, deur uitdruklik, soos kliënte versoek.

Bergingsvoorwaardes

1) Berg in 'n droë omgewing by kamertemperatuur.

2) Vermy klam en hoë temperature.

3) Gebruik onmiddellik nadat die binneste paksak oopgemaak is.

5 FAQs of 1200V fast recovery epitaxial diode module

The 1200V fast recovery epitaxial diode module handles high-power switching efficiently. Below are answers to common questions.

What are typical uses for this diode module?
It is used in power supplies, motor dryf, en omskakelaars. The design suits electric vehicles, hernubare energiestelsels, en industriële toerusting. The fast recovery feature reduces energy loss during switching. This makes it ideal for high-frequency circuits.

Why choose this over standard diodes?
Standard diodes have slower recovery times. This causes higher power loss and heat. The 1200V module cuts reverse recovery time sharply. Switching losses drop. Efficiency improves. The module also handles higher voltage and current levels.

How to manage heat in this module?
Proper heat dissipation is critical. Use heatsinks with good thermal conductivity. Verseker lugvloei rondom die module. Thermal paste improves contact between surfaces. Overheating shortens lifespan. Monitor temperature during operation.

Is the module reliable in tough conditions?
Ja. It is built for industrial environments. The epoxy coating protects against moisture and dust. It withstands temperatures from -40°C to 150°C. Vibration resistance prevents damage in mobile applications. Testing meets international standards like UL and IEC.

Can the module be customized?
Manufacturers offer options. Adjustments include current ratings, packaging, or terminal types. Custom configurations fit specific circuit layouts. Contact suppliers early to discuss requirements. Lead times vary based on complexity.

The module’s performance depends on correct installation and usage. Always follow the datasheet guidelines. Compatibility with other components must be checked beforehand.

(1200V fast recovery epitaxial diode module)