MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123

Introduction of MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123

The MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Anders as geïsoleerde modules, MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. Hierdie ontwerp vereenvoudig die stroombaanstruktuur, verminder koste, en verbeter doeltreffendheid.

 

Features and Benefits of MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123

Kompakte ontwerp: Omdat geen bykomende isolasie komponente nodig is nie, MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123s are typically smaller and lighter in weight.

Hoë werkverrigting: Verminderde energieverlies as gevolg van isolasiekomponente verbeter algehele omskakelingsdoeltreffendheid.

Lae koste: Duur isolasiekomponente word uitgeskakel, wat laer vervaardigingskoste tot gevolg het.

Vinnige reaksie: Die ingeboude Fast Recovery Diode (FRD) kan vinnig van 'n aan-toestand na 'n blokkerende toestand oorskakel, skakel verliese te verminder.

Hoë betroubaarheid: Gevorderde materiale en tegnologieë word gebruik om stabiele werking te verseker selfs in moeilike omgewings.

Maklik om te installeer en in stand te hou: Gestandaardiseerde koppelvlakke en verbindings vereenvoudig die installasieproses en vergemaklik latere instandhouding.

(MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123)

Specification of MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123

The MMSZ4692ET1 is a Zener diode. It provides stable voltage guideline. Its primary job is maintaining a consistent 6.8 volts. This takes place when it runs in reverse malfunction. Consider it as a pressure safety valve for electrical power.

This certain diode manages a maximum power dissipation of 500 milliwatt. This ranking is very important. It tells you how much power the diode can securely manage. Exceeding this limitation threats damaging the part. Keep its power use listed below 500mW.

The ranked Zener voltage is 6.8 V. There is a resistance. The actual voltage might be in between 6.46 V and 7.14 V. This is a ± 5% tolerance. Expect this variant under examination problems. The examination current is usually 5mA.

Leakage current is low. At voltages listed below 6.8 V, really little reverse existing flows. The maximum leak is 5 microamps at 4V. This is good for efficiency. Less power is wasted when the diode is off.

The diode can be found in a SOD123 surface-mount package. This is extremely little. It conserves room on circuit card. The package is made for automated setting up. It prevails for modern electronics manufacturing.

The tool manages a broad temperature level variety. Dit werk vanaf -65 °C tot +150 °C. This matches lots of environments. The Zener voltage adjustments slightly with temperature. The temperature coefficient is around +3 mV/ ° C for this voltage. This indicates the voltage enhances a little as it obtains hotter.

Common usages involve safeguarding circuits. It clamps voltage spikes. It maintains power supply outcomes. It supplies a reference voltage. You usually find it protecting sensitive inputs like CMOS logic gates. It stops voltage from going too expensive. It is also used in fundamental power regulation circuits. Die 6.8 V degree is useful for lots of low-voltage digital systems.

(MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123)

Applications of MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123

This MMSZ4692ET1 diode is a Zener kind. It provides a stable 6.8 volts. Designers pick this diode for voltage law. It maintains voltages stable in lots of circuits. Power materials require this security. Battery-powered tools need it too. It manages 500 milliwatt krag. This power rating fits typical electronic devices. It protects sensitive components. It quits voltage spikes from causing damages. Inputs on microcontrollers are susceptible. Sensor inputs can be delicate. This diode shields them. It clamps the voltage safely. It prevents signals from going too high. It prevents signals from going also low. It acts like a voltage reference. Circuits compare voltages against it. Analog-to-digital converters require accurate recommendations. This diode offers a reliable 6.8 V point. Its little SOD123 plan conserves room. Circuit card are commonly crowded. This little dimension fits quickly. Surface-mount assembly is typical. It functions well for portable gadgets. Automotive electronics utilize components such as this. Industrial controls need reputable components. Consumer electronic devices gain from its dimension. It takes care of modest power degrees properly. Designers trust its steady break down voltage. It starts conducting dependably at 6.8 V backwards. This predictable habits is essential. It makes sure consistent circuit procedure. It supplies an easy service for guideline. It gives an inexpensive option for security. It supplies a specific referral voltage. The MMSZ4692ET1 is a functional component.

Maatskappy profiel

PDDN Photoelectron Technology Co., Bpk.(sales@pddn.com) is een van die voorste ondernemings in kragelektronika-tegnologie en kragprodukte, wat ten volle betrokke is by die ontwikkeling van sonkrag-omsetters， transformators, spanning reguleerders, verspreidingskaste, tiristors， modules， diodes， verwarmers, en ander elektroniese toestelle of halfgeleiers. Ons sal daartoe verbind wees om gebruikers van hoë gehalte te voorsien, doeltreffende produkte en bedagsame diens.

Dit aanvaar betaling via kredietkaart, T/T, Wes Unie, en Paypal. PDDN sal die goedere aan kliënte oorsee stuur deur FedEx, DHL, deur die see, of per lug. If you want high-quality MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123, stuur asseblief vir ons navrae; ons sal hier wees om jou te help.

 

Betaalmetodes

L/C, T/T, Western Union, Paypal, Kredietkaart ens.

 

Versending

By see, deur die lug, deur uitdruklik, soos kliënte versoek.

 

Bergingsvoorwaardes

1) Berg in 'n droë omgewing by kamertemperatuur.

2) Vermy klam en hoë temperature.

3) Gebruik onmiddellik nadat die binneste paksak oopgemaak is.

5 FAQs of MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123

What does the MMSZ4692ET1 Zener diode do?
It keeps a steady voltage. It makes sure 6.8 volts stays constant in a circuit. Dit beskerm onderdele teen spanningspieke. It acts like a pressure relief valve for electricity.

How precise is the 6.8V rating?
It’s not perfectly exact. The actual voltage changes slightly. It depends on the current flowing through it. It also changes with temperature. Expect it between about 6.46 volt en 7.14 volts typically.

Wat beteken die kraggradering van 500mW?
This is its maximum power limit. You cannot exceed 500 milliwatt. Calculate power by multiplying voltage drop across it by the current through it. Keep this number below 500mW always.

How do I connect it? Correct polarity matters?
Ja, polarity is critical. Connect it backwards compared to a normal diode. Look for the cathode stripe on the SOD123 package body. Point this stripe towards the higher voltage point in your circuit.

Does heat affect this diode?
Ja, heat matters a lot. Power dissipation creates heat. Too much heat damages the diode. The 500mW rating assumes proper cooling. Ensure the ambient temperature stays within the specified range. Provide enough airflow if needed.

(MMSZ4692ET1 DIODE ZENER 6.8V 500MW SOD123)