MMSZ5243ET1 DIODE ZENER 13V 500MW SOD-123

Introduction of MMSZ5243ET1 DIODE ZENER 13V 500MW SOD-123

The MMSZ5243ET1 DIODE ZENER 13V 500MW SOD-123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, MMSZ5243ET1 DIODE ZENER 13V 500MW SOD-123 does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

 

Features and Benefits of MMSZ5243ET1 DIODE ZENER 13V 500MW SOD-123

Compact design: Because no additional isolation components are required, MMSZ5243ET1 DIODE ZENER 13V 500MW SOD-123s are typically smaller and lighter in weight.

High performance: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

High Reliability: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Easy to install and maintain: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(MMSZ5243ET1 DIODE ZENER 13V 500MW SOD-123)

Specification of MMSZ5243ET1 DIODE ZENER 13V 500MW SOD-123

The MMSZ5243ET1 is a Zener diode. It provides stable voltage regulation. This diode offers a nominal Zener voltage of 13V. It works within a standard tolerance range. This tolerance is typically ±5%. Engineers use it to set reference voltages. It also protects circuits from voltage spikes.

The diode handles a maximum power dissipation of 500 milliwatts. This rating is crucial for design. It shows how much energy the component can safely manage. Exceeding this limit risks damaging the diode. Designers must consider the operating conditions.

The device comes in a small SOD-123 surface-mount package. This compact size saves valuable board space. It is perfect for modern, dense electronic assemblies. Soldering it is straightforward using standard techniques. The package is reliable for automated production.

Key electrical parameters matter. The diode has a specified reverse leakage current. This current is low at voltages below the Zener voltage. Its forward voltage drop is typical for silicon diodes. The dynamic impedance affects regulation stability. This impedance is low around the 13V point.

This Zener diode suits many applications. It is common in voltage regulation circuits. It protects sensitive inputs on ICs. You find it clamping voltage levels in digital systems. It stabilizes power supplies. It also provides reference points in analog designs.

The MMSZ5243ET1 operates over a standard temperature range. This range is usually from -65°C to +150°C. Performance stays stable across these conditions. It is a dependable choice for various environments. The diode is shipped on tape and reel. This packaging suits high-volume manufacturing.

(MMSZ5243ET1 DIODE ZENER 13V 500MW SOD-123)

Applications of MMSZ5243ET1 DIODE ZENER 13V 500MW SOD-123

The MMSZ5243ET1 is a Zener diode. It regulates voltage. It keeps the voltage steady at 13 volts. This is vital. Electronic circuits need stable voltage. Too much voltage breaks parts. This diode protects them. It clamps the voltage. It stops voltage from going over 13V. It acts like a safety valve for electricity. It works in reverse bias. It conducts current backwards when voltage hits 13V. It handles up to 500 milliwatts of power. That’s its power dissipation rating. Don’t exceed this. It might get too hot. It fits in a SOD-123 package. This is a small surface-mount type. It saves space on circuit boards. It’s good for compact electronics. You find it in many devices. It protects inputs and outputs. It guards against voltage spikes. Power supplies use it for regulation. It helps set a reference voltage. Microcontrollers need stable references. This diode provides that. Battery-powered gadgets use it too. It prevents damage from charging issues. Automotive electronics need protection. Voltage can surge in cars. This diode helps manage that. Industrial controls rely on steady voltage. This component is useful there. Communication equipment uses voltage regulation. This diode is suitable. Its small size helps. Designers like compact parts. It’s reliable for basic clamping tasks. Check its voltage tolerance. It might be plus or minus 5%. This is typical. Ensure the voltage matches your need. Consider the power dissipation. Calculate the current flow. Stay below 500mW. Use a suitable resistor in series. This limits the current properly. Heat can be an issue. Good board layout helps cooling. This diode is common. It’s cost-effective for basic regulation. It won’t suit very high currents. It’s for lower power applications. Many suppliers stock this part. It’s a standard component.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality MMSZ5243ET1 DIODE ZENER 13V 500MW SOD-123, please send us inquiries; we will be here to help you.

 

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

 

Shipment

By sea, by air, by express, as customers request.

 

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of MMSZ5243ET1 DIODE ZENER 13V 500MW SOD-123

What is the MMSZ5243ET1 diode used for? The MMSZ5243ET1 is a Zener diode. Its main job is to provide a stable voltage reference. It also protects circuits from voltage spikes. It works by regulating voltage in a specific way.

What is its voltage rating? This diode has a nominal Zener voltage of 13 volts. This voltage is measured at a specific test current. The actual voltage might be slightly different. It could be a bit higher or lower than exactly 13 volts.

How much power can it handle? The diode can safely handle up to 500 milliwatts of power. This is its maximum power dissipation rating. Exceeding this power limit can damage the diode. You must stay within this power level.

What package does it come in? It comes in a small SOD-123 surface mount package. This package is designed for automated circuit board assembly. It saves space on the circuit board. It is a common package type.

How does it regulate voltage? It regulates voltage using the Zener effect. When voltage applied in reverse exceeds 13 volts, it starts conducting heavily. This action clamps the voltage across it to about 13 volts. It holds the voltage steady at that point.

Where is it typically used? You find it in many electronic circuits needing stable voltage. Common uses are voltage regulation in power supplies. It protects sensitive inputs from overvoltage. It sets reference voltages for other components.

(MMSZ5243ET1 DIODE ZENER 13V 500MW SOD-123)