MMSZ4679T1 DIODE ZENER 2V 500MW SOD123

Introduction of MMSZ4679T1 DIODE ZENER 2V 500MW SOD123

The MMSZ4679T1 DIODE ZENER 2V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, MMSZ4679T1 DIODE ZENER 2V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

 

Features and Benefits of MMSZ4679T1 DIODE ZENER 2V 500MW SOD123

Compact design: Because no additional isolation components are required, MMSZ4679T1 DIODE ZENER 2V 500MW SOD123s are typically smaller and lighter in weight.

High performance: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

High Reliability: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Easy to install and maintain: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(MMSZ4679T1 DIODE ZENER 2V 500MW SOD123)

Specification of MMSZ4679T1 DIODE ZENER 2V 500MW SOD123

The MMSZ4679T1 is a Zener diode. It regulates voltage. It keeps voltage steady at 2 volts. This diode handles up to 500 milliwatts of power. It uses a SOD123 surface mount package. This package is small. It saves space on circuit boards. You solder it directly onto the board. The SOD123 style is common. Many manufacturers use it.

This diode is good for voltage regulation tasks. It protects circuits from voltage spikes. It clamps voltage to safe levels. It sets reference voltages precisely. It works well in power supplies. It helps stabilize output voltage. It is useful in battery-powered devices. It prevents damage from overvoltage conditions.

The voltage rating is 2 volts. This is its nominal Zener voltage. The actual voltage can vary slightly. It depends on the current flowing through it. It depends on the temperature too. The tolerance is usually tight. This ensures reliable performance.

The maximum power dissipation is 500 milliwatts. This is the heat it can handle. Exceeding this limit can destroy the diode. Use proper heat sinking if needed. The maximum current depends on the voltage drop. Calculate it from the power rating.

The SOD123 package has two leads. They come out from the sides. The body is rectangular. It is very compact. The dimensions are standardized. This allows automated assembly. It fits high-density circuit layouts.

This diode suits many applications. Use it for voltage clamping. Use it for voltage regulation. It works in protection circuits. It is common in consumer electronics. It is found in industrial controls. It appears in automotive systems. It handles moderate power levels effectively. It offers stable voltage reference. It provides simple circuit protection. Choose it for its specific 2V rating. Choose it for its SOD123 footprint. It is a standard component. It is widely available.

(MMSZ4679T1 DIODE ZENER 2V 500MW SOD123)

Applications of MMSZ4679T1 DIODE ZENER 2V 500MW SOD123

This diode is a Zener type. Its main job is voltage regulation. It keeps a steady voltage level. It does this at 2 volts. This specific diode handles up to 500 milliwatts of power. It comes in a SOD123 package. This package is small and surface-mounted. It fits easily onto circuit boards. Its size saves space.

One big use is protecting circuits. It shields sensitive parts. It stops voltage spikes. Too much voltage can damage electronics. This diode clamps the voltage. It holds the voltage at or below 2 volts. This protects other components. It acts like a safety valve for electricity. This is vital in power supplies.

Another application is voltage reference. Circuits need a known voltage point. This diode provides a stable 2V reference. It helps other parts work correctly. This is useful in analog circuits. It ensures accuracy.

You will find it in signal clamping circuits. These circuits limit signal swings. They keep signals within safe limits. This diode clips signals above 2 volts. It maintains signal integrity. This is important for communication.

It also works in simple voltage regulators. These are for low-power needs. It holds the output voltage steady. It is often paired with a resistor. This creates a basic regulator. It is good for simple tasks. It is cost-effective.

This diode is reliable. Its SOD123 package is common. This makes it easy to use. It is suitable for many designs. It provides essential voltage control. Engineers choose it for its specs. It performs well in its range.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality MMSZ4679T1 DIODE ZENER 2V 500MW SOD123, please send us inquiries; we will be here to help you.

 

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

 

Shipment

By sea, by air, by express, as customers request.

 

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of MMSZ4679T1 DIODE ZENER 2V 500MW SOD123

What is the MMSZ4679T1 diode?
The MMSZ4679T1 is a Zener diode. It is a special kind of diode. It controls voltage in circuits. It keeps a steady voltage.

What voltage does it regulate?
This diode regulates 2 volts. Its Zener voltage is 2V. It keeps this voltage steady when reverse-biased. It does this even if the current changes.

How much power can it handle?
The diode handles 500 milliwatts. This is its power dissipation rating. You must not exceed this power. Exceeding it can damage the diode. Always check the power in your circuit.

What is its package type?
It uses a SOD123 package. This is a small surface-mount package. It saves space on circuit boards. It is common for many diodes.

Where is it typically used?
It is used for voltage regulation. It sets a reference voltage. It protects circuits from voltage spikes. It clamps voltages to safe levels. You find it in power supplies. You find it in electronic devices.

(MMSZ4679T1 DIODE ZENER 2V 500MW SOD123)