MMSZ5256ET1 DIODE ZENER 30V 500MW SOD123

Introduction of MMSZ5256ET1 DIODE ZENER 30V 500MW SOD123

The MMSZ5256ET1 DIODE ZENER 30V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, MMSZ5256ET1 DIODE ZENER 30V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

 

Features and Benefits of MMSZ5256ET1 DIODE ZENER 30V 500MW SOD123

Compact design: Because no additional isolation components are required, MMSZ5256ET1 DIODE ZENER 30V 500MW SOD123s are typically smaller and lighter in weight.

High performance: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

High Reliability: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Easy to install and maintain: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(MMSZ5256ET1 DIODE ZENER 30V 500MW SOD123)

Specification of MMSZ5256ET1 DIODE ZENER 30V 500MW SOD123

The MMSZ5256ET1 is a Zener diode. This part helps control voltage in circuits. It keeps voltage stable. The diode handles 30 volts. This is its Zener voltage rating. Circuits use this to set reference voltages. It protects parts from too much voltage. The diode manages power well. It can handle 500 milliwatts. This power rating is important. It shows how much energy the diode can take safely. You need to think about temperature too. Heat affects how it works. The diode comes in a SOD123 package. This is a small surface-mount design. It saves space on circuit boards. Soldering it directly onto the board is easy. The diode works reliably. It performs well in many applications. Common uses include voltage regulation. It clamps voltage spikes too. The diode provides protection for sensitive electronics. Its tolerance is acceptable. The actual Zener voltage might be slightly different. It is typically within 5%. This is fine for most circuit designs. The diode operates effectively. It functions correctly within its specified limits. Engineers choose this part often. It is popular for its combination of voltage and power. The SOD123 package is widely used. Many manufacturers make diodes in this form. The MMSZ5256ET1 fits standard designs. It is a good choice for 30V needs.

(MMSZ5256ET1 DIODE ZENER 30V 500MW SOD123)

Applications of MMSZ5256ET1 DIODE ZENER 30V 500MW SOD123

The MMSZ5256ET1 is a Zener diode. It handles 30 volts. It manages 500 milliwatts of power. This diode uses the SOD123 package. This small size helps save space. It fits well on circuit boards. It works reliably. This diode controls voltage. It keeps voltage stable at 30 volts. This is its main job. Circuits need steady voltage. This diode provides that. It stops voltage from going too high. It protects other parts. Sensitive electronics can break. This diode prevents damage. It clamps voltage spikes. Surges happen sometimes. This diode absorbs them. It acts like a safety valve. It keeps things safe. It works as a voltage reference. Circuits measure against it. This helps with accuracy. You find this diode in power supplies. It regulates output voltage. It is common there. It protects inputs and outputs. Ports connect to other devices. Voltage spikes might come in. This diode blocks them. It protects the circuit inside. It is used in automotive electronics. Cars have tough electrical conditions. This diode helps handle them. It works in industrial controls too. Factories need reliable parts. This diode is dependable. It suits battery-powered devices. Batteries drain over time. Voltage can change. This diode helps maintain levels. It is affordable. It is easy to use. Designers choose it often. It solves common voltage problems.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality MMSZ5256ET1 DIODE ZENER 30V 500MW SOD123, please send us inquiries; we will be here to help you.

 

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

 

Shipment

By sea, by air, by express, as customers request.

 

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of MMSZ5256ET1 DIODE ZENER 30V 500MW SOD123

People ask about the MMSZ5256ET1 Zener diode. What is this diode for? It regulates voltage. It keeps a steady 30 volts. This helps protect other parts in a circuit. Too much voltage can damage things. The diode stops this.

What is its voltage? The Zener voltage is 30 volts. It stays very close to 30V. This is important for stable circuits. You need the exact voltage. Check the datasheet for details.

How much power can it handle? This diode handles 500 milliwatts. That is its power rating. Don’t exceed this limit. Too much power will destroy the diode. Keep it under 500mW.

What package does it use? It comes in a SOD123 package. This is a small surface-mount part. It saves space on circuit boards. It is easy for machines to place.

Where do people use it? It works in many places. Use it for voltage regulation. Use it for overvoltage protection. It fits power supplies. It fits signal circuits. It protects sensitive electronics.

(MMSZ5256ET1 DIODE ZENER 30V 500MW SOD123)