MMSZ4681-HE3-08 DIODE ZENER 2.4V 500MW SOD123

Introduction of MMSZ4681-HE3-08 DIODE ZENER 2.4V 500MW SOD123

The MMSZ4681-HE3-08 DIODE ZENER 2.4V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, MMSZ4681-HE3-08 DIODE ZENER 2.4V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

 

Features and Benefits of MMSZ4681-HE3-08 DIODE ZENER 2.4V 500MW SOD123

Compact design: Because no additional isolation components are required, MMSZ4681-HE3-08 DIODE ZENER 2.4V 500MW SOD123s are typically smaller and lighter in weight.

High performance: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

High Reliability: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Easy to install and maintain: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(MMSZ4681-HE3-08 DIODE ZENER 2.4V 500MW SOD123)

Specification of MMSZ4681-HE3-08 DIODE ZENER 2.4V 500MW SOD123

This diode is the MMSZ4681-HE3-08. It is a Zener diode. The voltage it regulates is 2.4 volts. This means it keeps the voltage steady at 2.4V. It handles power up to 500 milliwatts. Its package type is SOD-123. This package is small. It saves space on circuit boards.

Zener diodes are used for voltage regulation. They are also used for voltage reference. They protect circuits from voltage spikes. This diode works well for these jobs. It is good for protecting sensitive electronics. It keeps voltage levels safe.

The SOD-123 package is common. It is easy to use in manufacturing. It fits well on PCBs. The diode is reliable. It performs consistently. Engineers trust this component. It meets industry standards.

You see this diode in many devices. It is in power supplies. It is in communication equipment. It is in consumer electronics. Its small size is a big advantage. It allows for compact designs. The 500mW power rating is sufficient for many uses. It handles typical circuit demands.

This specific part number is MMSZ4681-HE3-08. It identifies the exact component. It ensures you get the right diode. The diode operates within a temperature range. This range is typical for electronic parts. It functions well under normal conditions.

Consider this diode for your next project. It offers stable voltage control. It provides good protection. Its small footprint is beneficial. It is a solid choice for regulation needs.

(MMSZ4681-HE3-08 DIODE ZENER 2.4V 500MW SOD123)

Applications of MMSZ4681-HE3-08 DIODE ZENER 2.4V 500MW SOD123

The MMSZ4681-HE3-08 is a Zener diode. It regulates voltage at 2.4 volts. It handles up to 500 milliwatts of power. The small SOD123 package makes it good for tight spaces. This diode is common in many electronic circuits.

One key job is voltage regulation. It keeps a steady voltage level. Circuits need this for stable operation. The diode does this when reverse-biased. It starts conducting at 2.4 volts. This holds the voltage point constant. It protects sensitive parts from voltage changes. Power supplies often use Zener diodes like this.

Another use is voltage clamping. It stops voltages from going too high. It protects inputs on integrated circuits (ICs). Voltages above 2.4 volts get clamped to this level. This prevents damage. Signal lines need this protection. Surge events can harm electronics.

It also works as a voltage reference. Circuits need precise voltage points. The 2.4V level is useful. It gives a stable reference voltage. This is vital for analog circuits. Sensors and measurement tools rely on accurate references. This diode provides a simple solution.

You find this diode in portable gadgets. Phones and tablets need small parts. The SOD123 size fits perfectly. Battery-powered devices use it for regulation. Low voltage circuits like its 2.4V rating. Digital logic interfaces use it for level shifting.

It is also good for power management. Simple voltage regulators use it. It pairs with a resistor or transistor. This creates a basic regulated power supply. Low-power applications benefit. Microcontroller circuits often need this.

Circuit protection is another role. It shields against electrostatic discharge (ESD). It absorbs small voltage spikes. This extends the life of other components. Input and output ports need this safety.

Designers choose it for reliability. It is easy to use. No complex setup is required. Just connect it in the circuit. Its characteristics are stable. Performance stays consistent over time.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality MMSZ4681-HE3-08 DIODE ZENER 2.4V 500MW SOD123, please send us inquiries; we will be here to help you.

 

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

 

Shipment

By sea, by air, by express, as customers request.

 

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of MMSZ4681-HE3-08 DIODE ZENER 2.4V 500MW SOD123

What is the MMSZ4681-HE3-08?
This is a Zener diode. It regulates voltage. It protects circuits. It comes in a small SOD123 package. It is widely used.

What does this Zener diode do?
Its main job is voltage regulation. It keeps a steady 2.4 volts. It does this even if the input voltage changes. It protects sensitive parts from too much voltage. It acts like a safety valve for electricity.

What is the voltage rating?
Its Zener voltage is 2.4 volts. This is the voltage it regulates to. It is designed for this specific voltage. It is critical for circuit design. Use it where you need 2.4V regulation.

How much power can it handle?
This diode can handle up to 500 milliwatts (500mW). This is its power dissipation rating. Do not exceed this limit. Too much power damages the diode. Consider the current flowing through it.

What package is it in?
It uses the SOD123 surface-mount package. This is a small plastic package. It has two leads. It is designed for automated assembly. It saves space on circuit boards.

(MMSZ4681-HE3-08 DIODE ZENER 2.4V 500MW SOD123)