MMSZ5246ET1G DIODE ZENER 16V 500MW SOD123

Introduction of MMSZ5246ET1G DIODE ZENER 16V 500MW SOD123

The MMSZ5246ET1G DIODE ZENER 16V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, MMSZ5246ET1G DIODE ZENER 16V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

 

Features and Benefits of MMSZ5246ET1G DIODE ZENER 16V 500MW SOD123

Compact design: Because no additional isolation components are required, MMSZ5246ET1G DIODE ZENER 16V 500MW SOD123s are typically smaller and lighter in weight.

High performance: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

High Reliability: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Easy to install and maintain: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(MMSZ5246ET1G DIODE ZENER 16V 500MW SOD123)

Specification of MMSZ5246ET1G DIODE ZENER 16V 500MW SOD123

This MMSZ5246ET1G is a Zener diode. Its main job is voltage regulation. It provides a stable 16V reference voltage. This happens through its Zener breakdown effect. The diode reliably clamps voltage spikes. It protects sensitive circuits downstream. The rated Zener voltage is 16V. This is the voltage where it starts conducting significantly in reverse bias. It maintains this voltage across its terminals.

Power handling is critical. This diode manages up to 500 milliwatts (500mW) of power dissipation. This rating depends on proper circuit conditions. Good heat management is important. Exceeding the power limit risks damaging the component. The SOD123 surface-mount package houses this diode. This package type is very common. It is small and saves valuable board space. The SOD123 footprint is easy for automated assembly. Designers favor it for compact electronics.

This diode functions well in reverse bias. That’s its normal operating mode for regulation. Forward bias operation is standard. It behaves like a regular silicon diode then. The MMSZ5246ET1G suits many applications. It is ideal for basic voltage regulation tasks. It protects circuits from overvoltage events. It serves as a simple voltage reference source. You find it in power supplies. It protects inputs and outputs on boards. It stabilizes voltage levels in various circuits.

Key specifications define its performance. The Zener voltage tolerance is typically ±5%. This means the actual breakdown voltage falls between 15.2V and 16.8V. The maximum reverse leakage current is very low. This ensures minimal power loss when regulating. The thermal resistance influences heat flow away from the junction. Lower values are better for power dissipation. Always check the official datasheet. Confirm all electrical characteristics. Verify the mechanical dimensions for your PCB layout. The MMSZ5246ET1G offers reliable 16V clamping. Its 500mW power rating and SOD123 size make it widely useful.

(MMSZ5246ET1G DIODE ZENER 16V 500MW SOD123)

Applications of MMSZ5246ET1G DIODE ZENER 16V 500MW SOD123

The MMSZ5246ET1G Zener diode handles 16 volts breakdown voltage. It manages 500 milliwatts power dissipation. This surface-mount component comes in a compact SOD123 package. Zener diodes like this one maintain stable voltage levels. They work well in many electronic circuits.

Voltage regulation is a key job for this diode. It protects sensitive parts from voltage spikes. Place it after a power supply. It keeps the output steady at 16 volts. This stops voltage changes from harming other components. It works in battery chargers or small power modules.

Overvoltage protection uses this diode too. Connect it across a circuit input. If voltage jumps above 16 volts, the diode conducts. It shunts extra current to ground. This shields microcontrollers or sensors. It prevents damage from sudden power surges.

This diode serves as a voltage reference. Precision circuits need fixed voltage points. The MMSZ5246ET1G provides a reliable 16V benchmark. Use it in analog sensors or measurement gear. It gives stable readings for accurate comparisons.

Signal clipping benefits from this Zener diode. Audio circuits or data lines sometimes face distortion. The diode chops off peaks above 16 volts. It trims waveforms neatly. This cleans up signals in communication devices.

Reverse polarity protection is another application. Install the diode across power rails. It blocks current if batteries connect wrong. This saves circuits from accidental reverse installation.

The small SOD123 package fits tight spaces. It suits modern gadgets like phones or wearables. Designers choose it for dense circuit boards. Surface-mount assembly speeds up production.

Heat matters with this component. Stay below 500 milliwatts power. Use proper cooling. This avoids overheating failures. Check the datasheet for exact limits.

Voltage tolerance is tight. Expect about 5% variation. This suits most general electronics. Precision uses might need tighter specs.

This diode pairs well with resistors. Calculate series resistance carefully. It controls current flow. This ensures safe operation.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality MMSZ5246ET1G DIODE ZENER 16V 500MW SOD123, please send us inquiries; we will be here to help you.

 

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

 

Shipment

By sea, by air, by express, as customers request.

 

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of MMSZ5246ET1G DIODE ZENER 16V 500MW SOD123

What is the MMSZ5246ET1G?
It’s a Zener diode. Its job is maintaining a steady voltage. It’s rated for 16 volts. It handles up to 500 milliwatts of power. It comes in a small SOD123 surface-mount package.

What’s the key voltage for this diode?
The key voltage is 16 volts. This is its Zener voltage. It keeps this voltage steady across its terminals when reversed biased correctly. This voltage is critical for circuit design.

How much power can it safely handle?
This diode handles 500 milliwatts maximum. Don’t exceed this power limit. Power equals voltage times current. Watch the current flowing through the diode. Too much power causes overheating and failure.

Where is this diode typically used?
Use it for voltage regulation. It protects sensitive circuits from overvoltage spikes. It provides a stable voltage reference point. Common uses include power supplies and signal lines needing protection. It’s good where space is limited.

What package does it use?
It uses the SOD123 surface-mount package. This package is very small. It saves space on circuit boards. You need standard surface-mount assembly techniques. The small size is ideal for modern electronics.

(MMSZ5246ET1G DIODE ZENER 16V 500MW SOD123)