5STP25L5200 5STP 25L5200 SCR Triac Phase Control Thyristor for Power Regulator

Overview of Phase Control Thyristor

A phase control thyristor, often referred to as a triac or SCR (Silicon Controlled Rectifier) in certain applications, is a semiconductor device used for controlling the amount of power delivered to a load by adjusting the phase angle at which the AC waveform is allowed to conduct. This method of control is known as phase angle control or simply phase control. Phase control thyristors are widely used in various applications that require precise regulation of electrical power, such as lighting dimmers, motor speed controls, temperature controllers, and more.

Features of Phase Control Thyristor

Phase Angle Control: Allows adjustment of the conduction point within each half-cycle of the AC waveform, enabling precise control over the average power delivered to the load.

High Efficiency: Operates with minimal losses when conducting, providing efficient power control.

Bidirectional Conductivity (Triacs): For AC applications, triacs can conduct current in both directions, making them suitable for full-wave control of AC loads.

Unidirectional Conductivity (SCRs): SCRs conduct current in one direction only and are typically used for half-wave control of AC or DC loads.

Gate Triggering: Conduction begins when a small current is applied to the gate terminal, allowing for easy control of the turn-on point.

Latching Current: Once triggered, the thyristor continues to conduct until the current through it falls below a certain level called the holding current.

Temperature Sensitivity: Performance can be affected by temperature changes, requiring thermal management considerations in design.

Voltage and Current Ratings: Available in a wide range of voltage and current ratings to suit different application needs.

Noise Generation: Can generate electromagnetic interference (EMI), necessitating proper filtering and shielding in sensitive applications.

Protection Mechanisms: Often include built-in protection against overvoltage and overcurrent conditions to safeguard the device and connected systems.

(5STP25L5200 5STP 25L5200 SCR Triac Phase Control Thyristor for Power Regulator)

Specification of 5STP25L5200 5STP 25L5200 SCR Triac Phase Control Thyristor for Power Regulator

This component is the 5STP25L5200. It’s an SCR Triac Phase Control Thyristor. Its major job is controlling big amounts of power. Believe huge devices, industrial heaters, or power products. It handles just how much electrical energy circulations. It does this extremely exactly.

The 5STP25L5200 manages extremely high voltage. It obstructs up to 5200 volts. This is crucial for safety. It quits electricity where it should not go. It additionally manages large currents. Its optimal rise present rating is 25,000 amps. This is a huge number. It suggests the thyristor makes it through unexpected power spikes. These spikes take place during electric mistakes.

Dependability issues most here. This thyristor is developed tough. It makes use of an unique stress get in touch with design. This design is durable. It makes sure secure electric connections. It deals with duplicated high-stress cycles. Nuclear power plant and factories require this. Downtime sets you back a lot of money.

The cyclic surge capacity is crucial. The part number reveals this: 25L5200. The “25L” indicates 25 kA rise existing. The “5200” is the voltage ranking. This thyristor can deal with 25,000 amp surges repeatedly. This is a typical examination. It verifies the thyristor’s toughness under stress and anxiety.

Engineers choose this thyristor for demanding work. It fits power regulator circuits flawlessly. It manages the stage angle of a/c power. This smoothly adjusts power outcome. It functions dependably in high-voltage systems. Its high surge score supplies defense. It safeguards versus unexpected overloads.

The thyristor utilizes a typical stud-type plan. This makes setup straightforward. It connects easily to heatsinks. Great air conditioning is important. It keeps the thyristor working successfully. Proper mounting makes sure lengthy life. It does well in hard industrial settings.

(5STP25L5200 5STP 25L5200 SCR Triac Phase Control Thyristor for Power Regulator)

Applications of 5STP25L5200 5STP 25L5200 SCR Triac Phase Control Thyristor for Power Regulator

The 5STP25L5200 SCR Triac Phase Control Thyristor is a crucial part for power law. It deals with high voltage approximately 5200V and manages currents effectively. This thyristor suits industrial power control systems. It works by stage control. This approach adjusts power circulation timing in air conditioner cycles. It offers accurate power monitoring.

Industrial furnace utilize this thyristor. It regulates temperature in heaters and stoves. The tool readjusts power to burner. This makes certain consistent warm result. It prevents energy waste. Motor control applications benefit too. The thyristor controls electric motor rate. It handles conveyor belts and pumps. This avoids sudden power surges. Devices lasts longer.

Illumination systems depend on this element. It dims large-scale lighting efficiently. Movie theaters and factories utilize it for illumination control. Power financial savings result. Battery battery chargers incorporate the thyristor. It handles billing rates. Batteries bill securely. Overcharging risks decline.

Power materials in factories require this thyristor. It supports voltage changes. Equipments run without disruption. Assembly line stay efficient. The thyristor takes care of high rise currents. This safeguards during power spikes. System failings reduce. Upkeep expenses reduced.

Welding devices utilizes this component. It controls welding arc power. Joint high quality improves. Soft beginners for electric motors include it. Motors begin delicately. Mechanical anxiety decreases. The thyristor’s durable design withstands tough problems. Warm dissipation is reliable. Cooling is simpler. Placing on heat sinks is very easy. Replacement is straightforward in existing arrangements. Safety improves with high seclusion voltage. Operators face less threats. The 5STP25L5200 is trusted for requiring power control jobs.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality 5STP25L5200 5STP 25L5200 SCR Triac Phase Control Thyristor for Power Regulator, please send us inquiries; we will be here to help you.

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

Shipment

By sea, by air, by express, as customers request.

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of 5STP25L5200 5STP 25L5200 SCR Triac Phase Control Thyristor for Power Regulator

This thyristor controls power flow in AC systems. It switches high currents accurately. Engineers use it for precise phase control. You might see it in industrial heaters or motor speed controllers. It handles tough jobs reliably.

What is the 5STP25L5200 used for?
This part manages high power in AC circuits. It turns power on and off very precisely. It works well in power regulators. These control things like temperature in big ovens or the speed of large motors. It’s built for demanding industrial jobs.

What are its key specifications?
It blocks up to 5200 volts in the off state. It carries 25 amps average current. Its surge current rating is very high. This means it handles sudden overloads safely. The gate needs a small pulse to trigger it. These specs make it strong for heavy-duty control.

Why choose this specific thyristor?
It offers high voltage and current ratings together. This combination is essential for big power systems. Its design ensures stable switching performance. It handles high surge currents without failing. These features provide dependable operation in critical applications.

How is it mounted?
It comes in a standard Stud package. You bolt it directly onto a heat sink. This mounting method is simple and effective. Good metal-to-metal contact is crucial. This ensures heat moves away quickly. Proper mounting keeps the device cool and working right.

What about heat sinking?
Getting rid of heat is vital. This thyristor generates heat during operation. You must attach it to a suitable heat sink. The heat sink size depends on your application’s power. Keeping it cool prevents damage and extends its life. Always follow the thermal guidelines.

(5STP25L5200 5STP 25L5200 SCR Triac Phase Control Thyristor for Power Regulator)