Industrial Controls 100 Amp Scr Thyristor Scr Phase Control Thyristor R2714ZD16H For Westco

Overview of Phase Control Thyristor

A phase control thyristor, often referred to as a triac or SCR (Silicon Controlled Rectifier) in certain applications, is a semiconductor device used for controlling the amount of power delivered to a load by adjusting the phase angle at which the AC waveform is allowed to conduct. This method of control is known as phase angle control or simply phase control. Phase control thyristors are widely used in various applications that require precise regulation of electrical power, such as lighting dimmers, motor speed controls, temperature controllers, and more.

Features of Phase Control Thyristor

Phase Angle Control: Allows adjustment of the conduction point within each half-cycle of the AC waveform, enabling precise control over the average power delivered to the load.

High Efficiency: Operates with minimal losses when conducting, providing efficient power control.

Bidirectional Conductivity (Triacs): For AC applications, triacs can conduct current in both directions, making them suitable for full-wave control of AC loads.

Unidirectional Conductivity (SCRs): SCRs conduct current in one direction only and are typically used for half-wave control of AC or DC loads.

Gate Triggering: Conduction begins when a small current is applied to the gate terminal, allowing for easy control of the turn-on point.

Latching Current: Once triggered, the thyristor continues to conduct until the current through it falls below a certain level called the holding current.

Temperature Sensitivity: Performance can be affected by temperature changes, requiring thermal management considerations in design.

Voltage and Current Ratings: Available in a wide range of voltage and current ratings to suit different application needs.

Noise Generation: Can generate electromagnetic interference (EMI), necessitating proper filtering and shielding in sensitive applications.

Protection Mechanisms: Often include built-in protection against overvoltage and overcurrent conditions to safeguard the device and connected systems.

(Industrial Controls 100 Amp Scr Thyristor Scr Phase Control Thyristor R2714ZD16H For Westco)

Specification of Industrial Controls 100 Amp Scr Thyristor Scr Phase Control Thyristor R2714ZD16H For Westco

Here’s the spec for the Westco R2714ZD16H 100 Amp Thyristor:

This is the R2714ZD16H Stage Control Thyristor. Westco utilizes it. It takes care of high-power commercial jobs. The main work is managing air conditioning power flow. Assume large electric motors or heating units. It functions like a button for power. It turns on exactly during the air conditioning cycle. This controls the power level provided.

The core rating is 100 Amps. This is the constant current it brings. The voltage barring is strong. It withstands 1600 Volts peak off-state. The repeated peak reverse voltage is likewise 1600V. This makes it tough for demanding circuits.

Mounting is straightforward. It uses a conventional stud. The stud dimension is M16. You tighten it down effectively. The recommended torque is 30 Newton-meters. This makes sure good electric get in touch with. Excellent contact is critical. It stops overheating. Warmth sinking is very important. The thermal resistance is reduced. It’s rated at 0.12 ° C per Watt joint to situation. This helps move warm away quick.

The gate requires a signal to transform it on. The trigger current is low. It calls for a minimum of 150 milliamps. Eviction trigger voltage is 3 Volts optimum. This makes control uncomplicated. The tool turns on swiftly. The regular turn-on time is 5 microseconds. It shuts off fairly fast too. The common turn-off time is 60 split seconds.

Running temperatures matter. The junction deals with as much as 125 levels Celsius. This is the outright maximum. The storage space temperature range is vast. It goes from -40 ° C to +150 ° C. This fits extreme commercial settings. The tool is constructed for integrity. It follows typical commercial practices.

(Industrial Controls 100 Amp Scr Thyristor Scr Phase Control Thyristor R2714ZD16H For Westco)

Applications of Industrial Controls 100 Amp Scr Thyristor Scr Phase Control Thyristor R2714ZD16H For Westco

This Westco R2714ZD16H is a 100 Amp SCR thyristor constructed for difficult industrial jobs. It deals with phase control tasks. This means it exactly handles power circulation in a/c circuits. Think of it like an extremely quick, sturdy switch for power. It turns on at specifically the appropriate moment during the AC wave.

Its main work is regulating huge motors. Factories need electric motors to go for various rates. Conveyor belts, mixers, equipment devices – they all require variable speed. This thyristor makes that happen efficiently. It adjusts the power sent out to the electric motor windings. This gives trustworthy rate control without wasting energy.

Furnace also use this part. Huge stoves, heating systems, plastic molding makers require steady, flexible warmth. The thyristor manages the power going to heating elements. It preserves the precise temperature level called for. This conserves power and safeguards the heating systems.

Lighting control is one more usage. Assume huge warehouses, sporting activities areas, or stage illumination. You need to lower substantial banks of lights effectively. This SCR takes care of the high current needed. It supplies smooth dimming without flicker.

Industrial power materials depend on parts like this. Tools requires tidy, secure DC power transformed from a/c mains. The thyristor acts in the rectifier stage. It successfully converts air conditioner to DC. It handles the high currents dependably.

The R2714ZD16H is tough. It takes care of high rise currents usual in factories. Electric noise doesn’t easily interrupt it. Its style ensures stable changing. It links straight to typical heatsinks. This maintains it cool under hefty tons. Westco backs its performance for demanding phase control applications.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality Industrial Controls 100 Amp Scr Thyristor Scr Phase Control Thyristor R2714ZD16H For Westco, please send us inquiries; we will be here to help you.

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

Shipment

By sea, by air, by express, as customers request.

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of Industrial Controls 100 Amp Scr Thyristor Scr Phase Control Thyristor R2714ZD16H For Westco

This thyristor handles big industrial motor control jobs. Many people ask about the Westco R2714ZD16H. Here are five common questions and answers:

What is this thyristor mainly used for?
This thyristor controls AC power. It manages heavy-duty industrial motors. It adjusts motor speed smoothly. It controls power flow to heaters. It handles large electrical loads reliably.

What current can it handle?
It handles 100 amps continuously. This means it works with very high power equipment. It manages big motors without trouble. It is built tough for constant industrial use.

What voltage is it rated for?
It blocks up to 1600 volts peak. This high voltage rating protects against surges. It works safely in demanding industrial power systems. It stops unwanted current flow effectively.

Is this a phase control thyristor?
Yes, it controls power by phase angle. This method adjusts the power delivered each cycle. It allows precise motor speed control. It manages heater temperature accurately. It saves energy efficiently.

How do I mount it?
It needs a heatsink. Mount it securely onto a suitable heatsink. Use thermal paste for best heat transfer. Good cooling is essential. This keeps the thyristor working properly under load.

(Industrial Controls 100 Amp Scr Thyristor Scr Phase Control Thyristor R2714ZD16H For Westco)