MMSZ4692T1 DIODE ZENER 6.8V 500MW SOD123

Introduction of MMSZ4692T1 DIODE ZENER 6.8V 500MW SOD123

The MMSZ4692T1 DIODE ZENER 6.8V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, MMSZ4692T1 DIODE ZENER 6.8V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

 

Features and Benefits of MMSZ4692T1 DIODE ZENER 6.8V 500MW SOD123

Compact design: Because no additional isolation components are required, MMSZ4692T1 DIODE ZENER 6.8V 500MW SOD123s are typically smaller and lighter in weight.

High performance: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

High Reliability: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Easy to install and maintain: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(MMSZ4692T1 DIODE ZENER 6.8V 500MW SOD123)

Specification of MMSZ4692T1 DIODE ZENER 6.8V 500MW SOD123

Here is the requirements information for the MMSZ4692T1 diode. This component is a Zener diode. Its primary function is voltage regulation. The diode maintains a steady 6.8 volts throughout its terminals when reverse-biased. This specific voltage is its Zener voltage. The resistance for this voltage is tight. The real voltage will be in between 6.46 volts and 7.14 volts. This precision is very important for steady circuits.

The diode takes care of an optimum constant power dissipation of 500 milliwatts. This score tells you the power it can securely manage without damages. The SOD123 surface-mount bundle houses this diode. This bundle is extremely common. Its small dimension saves substantial board space. The SOD123 is suitable for automatic setting up procedures. This makes manufacturing easier.

The MMSZ4692T1 has a low maximum dynamic resistance. This insusceptibility is commonly 10 ohms at its test existing. Low resistance implies the voltage remains secure even when existing modifications slightly. This habits is essential for good voltage guideline. The diode is created for surface-mount innovation. Its small type element fits contemporary electronics.

Regular applications include voltage regulation tasks. It protects delicate parts from overvoltage events. It produces secure referral voltages in power materials. You find it in customer electronic devices, industrial controls, communication devices. The diode is reputable for securing voltage spikes. Its performance fits general-purpose circuit needs. The SOD123 bundle offers great thermal features. Heat dissipation suffices for its power ranking. This diode is a conventional choice for 6.8 V requirements. Designers appreciate its regular efficiency. It supplies an easy option for voltage stablizing.

(MMSZ4692T1 DIODE ZENER 6.8V 500MW SOD123)

Applications of MMSZ4692T1 DIODE ZENER 6.8V 500MW SOD123

The MMSZ4692T1 Zener diode uses a stable 6.8 V malfunction voltage. This specific voltage makes it very valuable. It stands out at controling voltage in many circuits. Power supplies often require consistent voltage degrees. This diode secures the voltage exactly at 6.8 V. It stops voltage from going expensive. Sensitive digital components need protection. Unexpected voltage spikes can ruin them. This diode acts as a safety and security device. It shunts excess voltage away from fragile components. It soaks up the power rise. This safeguards points like microcontrollers and sensors.

It gives a dependable voltage reference. Some circuits need an understood, fixed voltage point. This diode supplies a regular 6.8 V reference. This is vital for accurate measurements. Analog-to-digital converters make use of recommendation voltages. Power administration ICs count on stable recommendations. This diode offers that objective well. Its little SOD123 plan conserves area. Modern electronic devices are portable. This little dimension is a large benefit. It fits conveniently onto congested circuit card.

Its 500mW power ranking manages common loads. Designers choose it for its balance of performance and dimension. It works well in battery-powered devices. Performance issues below. It reduces lost power. Basic voltage regulatory authority circuits use it. It usually couple with a resistor. This develops a standard regulatory authority. It protects input/output pins on ICs. It supports voltage for low-power sensing units. It is a typical option for 6.8 V applications. Its efficiency is reliable. It is cost-efficient for lots of layouts. Designers trust it for basic law and defense tasks.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality MMSZ4692T1 DIODE ZENER 6.8V 500MW SOD123, please send us inquiries; we will be here to help you.

 

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

 

Shipment

By sea, by air, by express, as customers request.

 

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of MMSZ4692T1 DIODE ZENER 6.8V 500MW SOD123

What does the MMSZ4692T1 diode do?
It regulates voltage. It keeps the voltage across it steady at 6.8 volts. It does this when you connect it backwards in a circuit. This protects other parts from getting too much voltage.

Why is 6.8 volts important?
Many electronic chips need protection around 6.8 volts. This diode is perfect for guarding chips like microcontrollers or logic circuits. It clamps the voltage safely before harm happens.

How do I connect this diode?
Pay attention to the cathode stripe. Connect the striped end (cathode) to the positive voltage point you want to protect. Connect the other end (anode) to ground. Getting this wrong stops it working right.

What does 500mW mean?
500mW tells you the diode’s power limit. It’s the most power the diode can safely handle without breaking. You must make sure the current flowing through it times the voltage across it (6.8V) stays under 0.5 watts.

Can I use a different Zener diode?
Maybe. You need another 6.8V Zener diode. It must handle at least 500mW power. The SOD123 package size is common. Check the datasheet for the exact part. Using a different voltage or lower power rating risks circuit failure.

(MMSZ4692T1 DIODE ZENER 6.8V 500MW SOD123)