MMSZ4693T1 DIODE ZENER 7.5V 500MW SOD123

Introduction of MMSZ4693T1 DIODE ZENER 7.5V 500MW SOD123

The MMSZ4693T1 DIODE ZENER 7.5V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, MMSZ4693T1 DIODE ZENER 7.5V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

 

Features and Benefits of MMSZ4693T1 DIODE ZENER 7.5V 500MW SOD123

Compact design: Because no additional isolation components are required, MMSZ4693T1 DIODE ZENER 7.5V 500MW SOD123s are typically smaller and lighter in weight.

High performance: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

High Reliability: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Easy to install and maintain: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(MMSZ4693T1 DIODE ZENER 7.5V 500MW SOD123)

Specification of MMSZ4693T1 DIODE ZENER 7.5V 500MW SOD123

The MMSZ4693T1 is a Zener diode. It provides stable voltage regulation at 7.5 volts. This part is crucial for protecting sensitive circuits. It stops voltage spikes from causing damage. It maintains a steady voltage level even when input fluctuates.

Its nominal Zener voltage is 7.5V. This voltage is measured at a test current of 5mA. The tolerance is tight. It can be plus or minus 5%. So the actual voltage stays between 7.125V and 7.875V. This precision is important for reliable performance.

The diode handles a maximum power dissipation of 500 milliwatts. This is the total power it can safely absorb. Exceeding this limit risks permanent failure. The SOD123 surface-mount package helps manage heat. Its small size saves valuable board space.

Temperature affects its operation. The Zener voltage changes slightly with temperature. The temperature coefficient is typically around +1.5 mV/°C. This means the voltage increases a little as temperature rises. Designers must account for this in critical applications.

The SOD123 package is standard. It’s very common for small signal diodes. The package dimensions are small. This makes it easy to use in compact electronics. It’s suitable for automated assembly processes.

Its reverse leakage current is low. This current is measured below the Zener voltage. Low leakage means less wasted power. It improves circuit efficiency. This is good for battery-powered devices.

This diode is widely used. You find it in voltage reference circuits. It protects inputs on microcontrollers. It clamps voltage in power supplies. It stabilizes levels in sensor interfaces. It’s a versatile component for basic regulation tasks.

(MMSZ4693T1 DIODE ZENER 7.5V 500MW SOD123)

Applications of MMSZ4693T1 DIODE ZENER 7.5V 500MW SOD123

The MMSZ4693T1 Zener diode offers a specific 7.5V breakdown voltage. It handles up to 500 milliwatts of power. Its small SOD123 package fits easily onto circuit boards. This diode excels at stabilizing voltage levels.

You often see it protecting sensitive electronic inputs. Voltages above 7.5V get clamped safely. The diode shunts excess current to ground. This prevents damage to other components. It acts like a pressure relief valve for electricity. Circuits exposed to voltage spikes need this protection.

It also works well as a simple voltage reference. Its stable 7.5V breakdown point provides a known value. Other parts compare signals against this reference. This is crucial for accurate measurements. Basic power supplies sometimes use it for regulation. It maintains a steady 7.5V output under changing loads. Its performance is good for low-current needs.

The SOD123 case is very compact. This saves valuable space on modern electronics. Designers favor it for portable devices. Its surface-mount design suits automated assembly. This keeps manufacturing costs low. Reliability is generally high for this diode type. It meets common industry standards.

You find it guarding microcontroller pins. Sensor interfaces frequently use it too. Low-power voltage regulators incorporate it. Anywhere a precise 7.5V threshold is needed, this diode fits. Its 500mW rating suits many common applications. Higher power needs require a different Zener. The MMSZ4693T1 provides a solid solution for its specific ratings.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality MMSZ4693T1 DIODE ZENER 7.5V 500MW SOD123, please send us inquiries; we will be here to help you.

 

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

 

Shipment

By sea, by air, by express, as customers request.

 

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of MMSZ4693T1 DIODE ZENER 7.5V 500MW SOD123

The MMSZ4693T1 is a Zener diode. It regulates voltage at 7.5 volts. This diode keeps circuits stable. It protects against voltage spikes. If voltage goes above 7.5 volts, it conducts. This action prevents damage. The breakdown voltage is fixed at 7.5 volts. This is the point it starts working. The voltage stays close to 7.5 volts. The power rating is 500 milliwatts. This is the max power it can handle. At 7.5 volts, the max current is about 66 milliamps. Exceeding this may cause failure. The diode comes in a SOD123 package. This is a small surface-mount type. It measures about 2.6mm by 1.6mm. It fits tight spaces on circuit boards. The SOD123 package is common. It works with automated assembly. Key features include a sharp breakdown. The diode switches on quickly. It has low leakage current. This saves power when off. The diode is reliable. It suits many applications. Examples are power supplies. It holds output voltage steady. It protects inputs in gadgets. It stops static electricity harm. Automotive uses include voltage control. The diode handles tough conditions. It performs well in heat or cold.

(MMSZ4693T1 DIODE ZENER 7.5V 500MW SOD123)