MMSZ4693T1 DIODE ZENER 7.5V 500MW SOD123

Introduction of MMSZ4693T1 DIODE ZENER 7.5V 500MW SOD123

The MMSZ4693T1 DIODE ZENER 7.5V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, MMSZ4693T1 DIODE ZENER 7.5V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

 

Features and Benefits of MMSZ4693T1 DIODE ZENER 7.5V 500MW SOD123

Compact design: Because no additional isolation components are required, MMSZ4693T1 DIODE ZENER 7.5V 500MW SOD123s are typically smaller and lighter in weight.

High performance: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

High Reliability: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Easy to install and maintain: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(MMSZ4693T1 DIODE ZENER 7.5V 500MW SOD123)

Specification of MMSZ4693T1 DIODE ZENER 7.5V 500MW SOD123

The MMSZ4693T1 is a Zener diode designed for voltage regulation and protection. Its core feature is maintaining a stable voltage. It achieves this by carrying out current backwards bias at its particular voltage ranking. This tool is rated for a nominal Zener voltage of 7.5 volts. The real voltage under examination conditions is commonly extremely close to this worth. A resistance of ± 5% uses. This implies the real voltage can range in between 7.125 volts and 7.875 volts. It manages an optimum continuous power dissipation of 500 milliwatts. Staying within this power restriction is essential for reliable procedure. The diode runs successfully over a large temperature level range. Its defined junction temperature covers from -65 ° C to +150 ° C. This variety matches numerous common atmospheres. The part utilizes the tiny SOD123 surface-mount plan. This plan type is prominent for automated assembly. Its compact size saves important board room. The SOD123 dimensions are about 3.7 mm long, 1.7 mm broad, and 1.1 mm high. 2 leads protrude from the bundle finishes for soldering. The diode exhibits great stability under differing tons problems. Its vibrant resistance is reasonably low. This performance particular adds to effective voltage clamping. The MMSZ4693T1 finds typical use in standard voltage reference circuits. It protects sensitive inputs from overvoltage transients. It controls voltage in low-power DC power materials. It supports voltage degrees at particular factors on a circuit card. This Zener diode uses a reputable solution for these fundamental tasks. Its mix of voltage, power ranking, and plan makes it commonly suitable. Designers choose it for economical designs requiring secure 7.5 V policy.

(MMSZ4693T1 DIODE ZENER 7.5V 500MW SOD123)

Applications of MMSZ4693T1 DIODE ZENER 7.5V 500MW SOD123

The MMSZ4693T1 diode is a details Zener diode. It manages voltage at 7.5 volts. Its power handling is 500 milliwatts. It is available in a small SOD123 surface-mount bundle. This diode is really valuable in lots of digital circuits. Its main job is voltage regulation. It keeps a steady voltage throughout a circuit. It does this also if the input voltage adjustments or the lots existing modifications. You usually locate it providing a stable 7.5 V factor. This steady factor powers various other delicate parts needing precise voltage.

One more important use is protection. The MMSZ4693T1 safeguards sensitive components from voltage spikes. It imitates a security valve for electrical energy. Normal operating voltage goes through. But if the voltage jumps above 7.5 V, the diode begins performing strongly. This action clamps the voltage to 7.5 V. It stops the voltage from going higher. This secures ICs, transistors, or inputs from damages. It is common in power supply outcomes. It protects USB ports. It guards microcontroller pins.

The diode likewise offers well as a simple voltage reference. Circuits contrast various other voltages versus this stable 7.5 V recommendation. Sensors utilize it for calibration. Analog-to-digital converters need a recognized recommendation. Comparators check signals against it. Its security is good sufficient for many fundamental referral tasks. The tiny SOD123 package is essential. It conserves considerable area on circuit boards. This is crucial for contemporary, compact electronics. Phones, tablets, wearables, and IoT gadgets all use components like this. Designers choose it for its details voltage, power score, and size. It takes care of the demands of battery-powered devices. It fits into tight areas easily. It is reliable for securing and controling jobs.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality MMSZ4693T1 DIODE ZENER 7.5V 500MW SOD123, please send us inquiries; we will be here to help you.

 

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

 

Shipment

By sea, by air, by express, as customers request.

 

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of MMSZ4693T1 DIODE ZENER 7.5V 500MW SOD123

What is the MMSZ4693T1 diode?
The MMSZ4693T1 is a Zener diode. It provides a stable 7.5V reference voltage. Its power rating is 500 milliwatts. The SOD123 package makes it compact for surface-mount circuits.

What does this diode do?
It regulates voltage in electronic circuits. It keeps voltage steady at 7.5V. It protects sensitive parts from voltage spikes. It acts like a pressure relief valve for electricity.

Why choose the SOD123 package?
SOD123 is small. It fits tight spaces on circuit boards. It works well in automated manufacturing. Two leads make soldering straightforward.

How much current can it handle?
Maximum current depends on power limits. At 7.5V and 500mW, current stays below 67mA. Always use a series resistor. This prevents overheating. Exceeding 500mW damages the diode.

Is it good for overvoltage protection?
Yes. It clamps voltage spikes at 7.5V. If voltage rises too high, the diode conducts. This shields components like microcontrollers. It is a simple defense against electrical surges.

(MMSZ4693T1 DIODE ZENER 7.5V 500MW SOD123)