MMSZ4691T1 DIODE ZENER 6.2V 500MW SOD123

Introduction of MMSZ4691T1 DIODE ZENER 6.2V 500MW SOD123

The MMSZ4691T1 DIODE ZENER 6.2V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, MMSZ4691T1 DIODE ZENER 6.2V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

 

Features and Benefits of MMSZ4691T1 DIODE ZENER 6.2V 500MW SOD123

Compact design: Because no additional isolation components are required, MMSZ4691T1 DIODE ZENER 6.2V 500MW SOD123s are typically smaller and lighter in weight.

High performance: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

High Reliability: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Easy to install and maintain: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(MMSZ4691T1 DIODE ZENER 6.2V 500MW SOD123)

Specification of MMSZ4691T1 DIODE ZENER 6.2V 500MW SOD123

Right here’s the requirements for the MMSZ4691T1 Zener diode. This component is a 6.2 volt Zener diode. It handles up to 500 milliwatts of power dissipation. The SOD123 surface mount plan holds the diode. This package is extremely small. It looks like a grain of rice. The small dimension saves considerable board space.

The Zener voltage is precisely regulated. It is 6.2 volts at a details test current. The examination current is normally 5 milliamps. The resistance for this voltage is tight. It is ± 5%. This indicates the real voltage falls in between 5.89 volts and 6.51 volts. This precision is necessary for stable voltage referrals.

Maximum power dissipation is 500 milliwatts. This ranking depends on the temperature level. The power rating decreases as the diode gets hotter. The derating curve in the datasheet reveals this. Always examine the derating curve for high-temperature operation.

The reverse leak current is very reduced. It is commonly only a few microamps. Leak is determined below the Zener voltage. This reduced leakage helps save power.

The operating temperature level variety is broad. The diode functions from -65 ° C to +150 ° C. This makes it appropriate for lots of settings. It operates well in industrial applications.

This diode serves well as a voltage reference. It establishes exact voltage points in circuits. It is likewise utilized for fundamental voltage policy. It safeguards sensitive parts from overvoltage events. It secures voltage spikes on signal lines. It shields inputs on incorporated circuits. Its little dimension fits portable electronics. It operates in power supplies also.

(MMSZ4691T1 DIODE ZENER 6.2V 500MW SOD123)

Applications of MMSZ4691T1 DIODE ZENER 6.2V 500MW SOD123

The MMSZ4691T1 is a Zener diode. Its work is voltage regulation. This certain diode regulates at 6.2 volts. It takes care of power up to 500 milliwatts. The SOD123 bundle maintains it really small. This dimension is excellent for limited motherboard.

Zener diodes job differently from routine diodes. They carry out electricity backward when voltage gets too expensive. This “break down” takes place right at their ranked voltage. For the MMSZ4691T1, that voltage is 6.2 V. So, it starts conducting backward if voltage tries to exceed 6.2 volts. This action clamps the voltage down. It secures delicate components downstream.

One major use is straightforward voltage regulation. You usually see it producing a steady 6.2 V reference factor. This is useful in power supplies or sensor circuits. It offers a reputable voltage various other components can contrast versus. Another vital job is voltage clamping. Circuits can experience voltage spikes. These spikes damage parts. The MMSZ4691T1 quits this. If a spike presses voltage above 6.2 V, the diode carries out. It shunts the excess existing securely to ground. This maintains the secured circuit risk-free.

You also find it securing inputs and outcomes. Microcontrollers and reasoning chips despise overvoltage. Positioning this Zener across a signal line guards it. Any kind of voltage above 6.2 V gets clamped. It functions as a fundamental surge guard. It prevails near ports or delicate IC pins.

Its little SOD123 package is a huge benefit. Modern electronics demand miniaturization. This diode fits conveniently right into portable layouts. Phones, tablet computers, wearables, and thick PCBs all utilize parts such as this. The 500mW power ranking is sufficient for several low-power tasks. Believe battery-powered gadgets or signal-level circuits. It manages the current needed for securing and regulation in these applications.

The 6.2 V ranking is a common value. Many circuits need policy near this voltage. Maybe for powering low-voltage logic or specific sensing units. The combination of its voltage, power handling, and little dimension makes the MMSZ4691T1 very functional. Developers select it for its reliability and space-saving benefits.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality MMSZ4691T1 DIODE ZENER 6.2V 500MW SOD123, please send us inquiries; we will be here to help you.

 

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

 

Shipment

By sea, by air, by express, as customers request.

 

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of MMSZ4691T1 DIODE ZENER 6.2V 500MW SOD123

What is the MMSZ4691T1 diode?
It’s a Zener diode. It controls voltage. Use it mainly to keep a steady voltage in circuits. Its specific voltage is 6.2 volts.

What’s its voltage rating?
The key voltage is 6.2 volts. This is the Zener voltage. It means the diode starts conducting well in reverse at about this voltage. It keeps the voltage near 6.2V across its terminals.

How much power can it handle?
The maximum power it can safely dissipate is 500 milliwatts. This is its power rating. Don’t exceed this limit. Exceeding it can damage the diode. Check the current flow through it. Ensure the power stays below 500mW.

What package does it use?
It comes in the SOD123 surface-mount package. This is a very small plastic package. It has two leads. This size is common. It saves space on circuit boards.

Where is it typically used?
Its main job is voltage regulation. Use it to clamp or stabilize a voltage point at 6.2V. Common spots are protecting sensitive inputs. It protects against overvoltage. It also provides a stable reference voltage.

(MMSZ4691T1 DIODE ZENER 6.2V 500MW SOD123)