MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123

Introduction of MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123

The MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

Features and Benefits of MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123

Compact design: Because no additional isolation components are required, MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123s are typically smaller and lighter in weight.

High performance: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

High Reliability: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Easy to install and maintain: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123)

Specification of MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123

The MMSZ7V5ET1 is a Zener diode. It offers voltage regulation at 7.5 volts. This component takes care of up to 500 milliwatts of power. It makes use of the tiny SOD123 surface-mount package. This size conserves space on modern-day motherboard. The SOD123 style is common and simple to position automatically.

Its key work is keeping a secure 7.5 V recommendation voltage. It does this in reverse prejudice procedure. The voltage tolerance is limited. The nominal Zener voltage (Vz) is 7.5 V. The real voltage gauged at the test current (Izt) of 5mA falls between 7.13 V and 7.87 V. This accuracy is essential for reliable circuits.

The diode handles an optimal reverse present (Ir) of 100 nanoamps. This reduced leak existing takes place at 4 volts reverse bias. The optimum Zener insusceptibility (Zzt) is 20 ohms. This impedance is measured at the test current of 5mA. A reduced insusceptibility frequently indicates much better voltage law under changing tons conditions.

The optimal power dissipation (Ptot) is 500mW. This rating is vital for style. Exceeding it harms the diode. The operating temperature level variety is vast. It functions from -65 ° C to +150 ° C. This makes it ideal for numerous settings. The diode is unidirectional. It conducts present openly in the forward instructions like a standard diode. In reverse bias, it regulates voltage once break down takes place.

Regular uses include voltage clamping. It safeguards sensitive inputs from overvoltage spikes. It functions well as a simple voltage reference. Designers utilize it for waveform shaping. It discovers functions in power supplies and signal conditioning circuits. Its small size and reliable efficiency make it popular. The MMSZ7V5ET1 offers an affordable option for 7.5 V policy requirements. Constantly inspect the datasheet for absolute maximum scores. Make sure appropriate warm dissipation in your design.

(MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123)

Applications of MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123

The MMSZ7V5ET1 is a 7.5 V Zener diode. It takes care of 500mW power. Its tiny SOD123 bundle fits limited spaces. This diode controls voltage specifically. You can utilize it in numerous circuits.

One primary work is voltage regulation. It maintains a stable 7.5 V output. Position it across a power supply. It clamps the voltage at 7.5 V. This shields delicate parts downstream. It stops voltage spikes. It prevents over-voltage damage. It’s good for protecting inputs on ICs or sensing units. It absorbs unexpected rises quickly.

It also helps signal securing. It quits signals going too expensive. It clips waveforms over 7.5 V. This is useful in audio circuits. It safeguards analog-to-digital converters. It makes sure signals remain within secure restrictions.

Another usage is offering a steady recommendation voltage. You need a known voltage point. This diode gives a set 7.5 V reference. Use it in power supplies. Utilize it in voltage monitors. It aids compare other voltages accurately.

Its little size aids in mobile gadgets. Believe phones, tablet computers, wearables. It fits on crowded circuit card. It saves room. It does not add much weight.

It defends against electrostatic discharge. ESD can fry electronics. This diode diverts the rise harmlessly. Place it near ports. Position it on information lines. It guards ports like USB.

You see it in power management circuits. It stabilizes prejudice factors. It protects low-power microcontrollers. It protects communication lines like I2C or SPI. It makes sure secure operation.

It’s dependable for basic tasks. It’s cost-effective. Its specifications are distinct. It carries out constantly. Engineers trust it for simple security. It uses a solid service without intricacy. It satisfies typical style requirements.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123, please send us inquiries; we will be here to help you.

 

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

 

Shipment

By sea, by air, by express, as customers request.

 

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123

What is the MMSZ7V5ET1?
This is a Zener diode. It regulates voltage. Its main job is maintaining a steady 7.5 volts across its terminals. You use it in circuits needing stable voltage.

What does it do?
The diode lets current flow backwards once voltage hits 7.5 volts. This “breakdown” keeps the voltage at 7.5V. It protects sensitive parts from voltage spikes. It gives a stable reference voltage.

Key specifications?
Its voltage is 7.5 volts. Its power rating is 500 milliwatts. It comes in a tiny SOD123 surface-mount package. This saves space on circuit boards. Its tolerance is usually ±5%.

Where is it used?
Find it protecting inputs on ICs or microcontrollers. It clamps voltage surges. It provides a simple voltage reference. It stabilizes voltage in low-power supplies. It is common in many electronic devices.

How is it different from a regular diode?
Regular diodes block reverse current. This Zener diode conducts reverse current at 7.5V. Regular diodes are for rectification. This Zener is for voltage regulation and protection.

(MMSZ7V5ET1 DIODE ZENER 7.5V 500MW SOD123)