Phase Control Thyristor T253-1250 SCR Thyristor Module

Overview of Phase Control Thyristor

A phase control thyristor, often referred to as a triac or SCR (Silicon Controlled Rectifier) in certain applications, is a semiconductor device used for controlling the amount of power delivered to a load by adjusting the phase angle at which the AC waveform is allowed to conduct. This method of control is known as phase angle control or simply phase control. Phase control thyristors are widely used in various applications that require precise regulation of electrical power, such as lighting dimmers, motor speed controls, temperature controllers, and more.

Features of Phase Control Thyristor

Phase Angle Control: Allows adjustment of the conduction point within each half-cycle of the AC waveform, enabling precise control over the average power delivered to the load.

High Efficiency: Operates with minimal losses when conducting, providing efficient power control.

Bidirectional Conductivity (Triacs): For AC applications, triacs can conduct current in both directions, making them suitable for full-wave control of AC loads.

Unidirectional Conductivity (SCRs): SCRs conduct current in one direction only and are typically used for half-wave control of AC or DC loads.

Gate Triggering: Conduction begins when a small current is applied to the gate terminal, allowing for easy control of the turn-on point.

Latching Current: Once triggered, the thyristor continues to conduct until the current through it falls below a certain level called the holding current.

Temperature Sensitivity: Performance can be affected by temperature changes, requiring thermal management considerations in design.

Voltage and Current Ratings: Available in a wide range of voltage and current ratings to suit different application needs.

Noise Generation: Can generate electromagnetic interference (EMI), necessitating proper filtering and shielding in sensitive applications.

Protection Mechanisms: Often include built-in protection against overvoltage and overcurrent conditions to safeguard the device and connected systems.

(Phase Control Thyristor T253-1250 SCR Thyristor Module)

Specification of Phase Control Thyristor T253-1250 SCR Thyristor Module

The T253-1250 is a Stage Control Thyristor module. This SCR module handles high power air conditioning tons. It controls the power circulation exactly. Engineers utilize it popular industrial setups. It deals with high present. It operates at high voltage.

Its crucial spec is the optimum repeated off-state voltage. This voltage score is 1250 volts. The device obstructs this voltage securely when off. The optimum RMS on-state current is 1250 amperes. The thyristor lugs this current constantly when activated. Peak rise current hold up against is much higher. This safeguards versus short overloads.

The module calls for a certain entrance signal. Eviction trigger existing requirements 250 milliamps minimum. Eviction trigger voltage is 3 volts optimum. These values ensure reliable turn-on. Correct gateway drive is necessary. The holding current is reduced. This keeps the thyristor carrying out as soon as started.

Thermal monitoring is vital. The module mounts onto a heatsink. Excellent thermal paste is needed. The joint temperature level should stay listed below 125 ° C. Heat harm the tool. The thermal resistance is reduced. This aids warm flow away rapidly.

This thyristor matches phase-angle control circuits. It changes power in motor drives. It controls burner properly. It takes care of illumination systems. It works in power supplies. The T253-1250 supplies robust performance. It offers trusted changing for hefty loads. Its design concentrates on industrial resilience. Proper setup ensures long service life. Follow the maker’s mounting guidelines. Use the suggested clamping force. Check the electric links. Appropriate air conditioning is non-negotiable. This SCR module supplies regular power control.

(Phase Control Thyristor T253-1250 SCR Thyristor Module)

Applications of Phase Control Thyristor T253-1250 SCR Thyristor Module

The T253-1250 SCR Thyristor Component is an effective semiconductor tool. It regulates big quantities of electrical power. This component uses phase control. Stage control handles the power circulation precisely. It does this by switching the air conditioner waveform on and off at specific points. This approach is efficient for readjusting power degrees.

The component deals with high present and voltage. Its rating is 1250 Amps and 1600 Volts. This makes it ideal for durable jobs. It needs a reliable warmth sink. Appropriate cooling is vital for its procedure. The module has a sturdy metal housing. This secures the interior silicon elements. It makes sure long-term dependability in difficult conditions.

Factories utilize these thyristor modules widely. They regulate big commercial heating units. Accurate temperature control is feasible. This is crucial for procedures like steel therapy or plastic creating. The modules additionally take care of large electric motor speeds. They change the power to motors smoothly. This is important for conveyor systems or pumps. Another crucial usage is in power supplies. They offer steady, adjustable DC power for electroplating or anodizing lines. Lights systems benefit as well. They dim substantial arena lights or phase lights setups efficiently. Uninterruptible Power Material (UPS) use them. They change power sources promptly throughout failures.

The T253-1250 uses a straightforward control technique. It utilizes a low-power gate signal. This signal tells the module when to activate. This makes system style less complicated. Maintenance is straightforward. Specialists can change modules quick. This minimizes downtime in production settings. Its durable style manages electrical sound well. This prevails in commercial atmospheres. The component supplies regular performance. It supplies trusted power control for several requiring applications.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality Phase Control Thyristor T253-1250 SCR Thyristor Module, please send us inquiries; we will be here to help you.

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

Shipment

By sea, by air, by express, as customers request.

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of Phase Control Thyristor T253-1250 SCR Thyristor Module

What is the T253-1250 SCR Thyristor Module?
It’s a power semiconductor device. It controls large electrical currents. It uses a silicon-controlled rectifier (SCR). SCRs are a type of thyristor. This module handles high power levels. It’s designed for phase control applications.

What does this module do?
It acts like a very precise switch for AC power. It can turn on at specific points during the AC voltage wave. This controls the amount of power delivered to a load. Think of it like a dimmer switch, but for heavy industrial equipment. It manages motors, heaters, or lights. It does this efficiently.

Where is this thyristor module used?
You find it in industrial settings. Common uses include motor speed controllers. It works in industrial heating systems. It regulates large lighting installations. It functions in power supplies. Any application needing adjustable AC power uses modules like this. Factories and plants rely on them.

Why choose this specific SCR module?
It handles high current, up to 1250 Amps. Its voltage rating is also high. The design is robust for tough environments. It provides reliable phase control. Its performance is consistent. This makes it suitable for demanding tasks. Long-term reliability is important here.

How do you install and use it?
Mount it securely on a heatsink. Good thermal management is critical. Connect the power terminals correctly. Use the gate control signal properly. Follow the manufacturer’s wiring diagram exactly. Ensure proper cooling airflow. Always observe electrical safety rules. Incorrect handling damages the module.

(Phase Control Thyristor T253-1250 SCR Thyristor Module)