MMSZ4703ET3 DIODE ZENER 16V 500MW SOD123

Introduction of MMSZ4703ET3 DIODE ZENER 16V 500MW SOD123

The MMSZ4703ET3 DIODE ZENER 16V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, MMSZ4703ET3 DIODE ZENER 16V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

Features and Benefits of MMSZ4703ET3 DIODE ZENER 16V 500MW SOD123

Compact design: Because no additional isolation components are required, MMSZ4703ET3 DIODE ZENER 16V 500MW SOD123s are typically smaller and lighter in weight.

High performance: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

High Reliability: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Easy to install and maintain: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(MMSZ4703ET3 DIODE ZENER 16V 500MW SOD123)

Specification of MMSZ4703ET3 DIODE ZENER 16V 500MW SOD123

The MMSZ4703ET3 is a Zener diode. It provides a steady reference voltage. This diode is established for 16 volts. It breaks down at this voltage. The break down happens in reverse bias. This quality is vital for policy.

It manages up to 500 milliwatts of power. This power ranking is essential. It informs you the optimum power the diode can safely dissipate. You should not exceed this limitation. Overheating can damage the part.

The diode can be found in an SOD123 surface-mount bundle. This package is tiny. It conserves space on motherboard. The SOD123 prevails. Many suppliers use it. This makes sourcing very easy.

Voltage policy is its primary job. It keeps voltage stable at 16V. Circuits need secure voltages. Sensors, microcontrollers, and reasoning gateways depend on this stability. The diode secures voltage spikes. It secures sensitive parts downstream.

It takes care of brief rises well. Rises happen often in electronics. Power supply glitches or switching events cause them. The diode absorbs this energy. This protects against damage.

The forward voltage is reduced. It imitates a routine diode also. Current flows quickly in the forward instructions. This voltage drop has to do with 0.9 volts normally. It’s suitable for basic signal transmitting.

Its little dimension fits modern electronic devices. Phones, tablet computers, and wearables use portable parts. Power products and control panel benefit from it. Developers select it for space-constrained applications.

The diode offers excellent stability. Its voltage stays regular over a range. Temperature modifications affect it somewhat. The efficiency remains trusted under typical problems. Designers trust it for standard guideline jobs. It supplies a cost-efficient solution. You require steady 16V references usually. This diode supplies that function reliably.

(MMSZ4703ET3 DIODE ZENER 16V 500MW SOD123)

Applications of MMSZ4703ET3 DIODE ZENER 16V 500MW SOD123

The MMSZ4703ET3 is a 16V Zener diode. It manages approximately 500mW of power. It is available in a small SOD123 plan. This diode regulates voltage specifically. It turns on highly when voltage strikes 16V. This makes it valuable for a number of tasks.

One main job is protecting circuits. Sensitive parts can break if voltage obtains too high. This diode quits that. Attach it across the power line. If voltage spikes above 16V, the diode carries out. It pulls the voltage down. This guards other parts. It imitates a safety and security shutoff for power.

Another task is voltage policy. Sometimes you require a steady voltage recommendation. This diode gives a set 16V factor. It functions also if the input voltage adjustments. Utilize it in simple power materials. It gives a stable 16V output for low-power requirements. It benefits sensing units or standard logic circuits.

It likewise works in wave shaping circuits. Signals can get noisy. This diode clips off tops over 16V. It tidies up the signal form. This is handy in audio or data lines.

Its small dimension is a huge and also. The SOD123 package fits quickly onto circuit card. This conserves room. It works well in compact gadgets. Assume phones, gadgets, or little control panel.

The 500mW power ranking matters. It tells you just how much energy the diode can take care of safely. Surpass this and the diode could fail. Constantly examine the power in your design. Use a resistor to restrict the existing streaming through it. This keeps the diode within its safe area.

You’ll find this diode protecting inputs on microcontrollers. It defends against static power. It additionally aids establish specific voltage levels for analog circuits. Its dependability and straightforward use make it an usual selection. It resolves fundamental voltage control troubles efficiently.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality MMSZ4703ET3 DIODE ZENER 16V 500MW SOD123, please send us inquiries; we will be here to help you.

 

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

 

Shipment

By sea, by air, by express, as customers request.

 

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of MMSZ4703ET3 DIODE ZENER 16V 500MW SOD123

What does this diode do?
It regulates voltage. This diode keeps circuits safe from voltage spikes. It acts like a pressure relief valve for electricity. It ensures voltage stays near 16 volts.

What does “16V” mean?
“16V” is its Zener voltage. This is the voltage it controls. It starts conducting significantly backwards at this voltage. It clamps the voltage across it to around 16 volts.

What is “500mW” for?
“500mW” is its maximum power rating. This is the most heat it can handle safely. Exceeding this power damages the diode. You must calculate the power it uses (Voltage across it multiplied by Current through it). Keep this below 500 milliwatts.

What is SOD123?
SOD123 is its package type. This is its physical size and shape. SOD123 is a very small surface-mount package. It has two leads and is designed for automated circuit board assembly. It saves space on the board.

Can I replace it with another diode?
Maybe, but be careful. You need a 16V Zener diode. Its power rating must be at least 500mW. The package must fit your board layout. SOD123 is common. Check the replacement’s specifications match exactly. Using the wrong part risks circuit failure.

(MMSZ4703ET3 DIODE ZENER 16V 500MW SOD123)