MMSZ8V2ET1 DIODE ZENER 8.2V 500MW SOD123

Introduction of MMSZ8V2ET1 DIODE ZENER 8.2V 500MW SOD123

The MMSZ8V2ET1 DIODE ZENER 8.2V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, MMSZ8V2ET1 DIODE ZENER 8.2V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

Features and Benefits of MMSZ8V2ET1 DIODE ZENER 8.2V 500MW SOD123

Compact design: Because no additional isolation components are required, MMSZ8V2ET1 DIODE ZENER 8.2V 500MW SOD123s are typically smaller and lighter in weight.

High performance: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

High Reliability: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Easy to install and maintain: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(MMSZ8V2ET1 DIODE ZENER 8.2V 500MW SOD123)

Specification of MMSZ8V2ET1 DIODE ZENER 8.2V 500MW SOD123

The MMSZ8V2ET1 is a Zener diode. Its major job is voltage guideline. It gives a secure 8.2 volts. This steady voltage is its nominal Zener voltage. You can count on it for this. The tolerance is plus or minus 5%. So the real voltage might be in between 7.79 volts and 8.61 volts. This accuracy is important for many circuits.

It takes care of approximately 500 milliwatts of power. This is its optimal power dissipation. This ranking tells you how much energy it can securely soak up. Don’t surpass this restriction. Otherwise, the diode might overheat. Damages is likely.

The diode is available in a SOD123 surface-mount package. This package is extremely usual. It is little. The dimension is good for saving room on motherboard. You can place several components close together. This is useful in contemporary electronic devices.

The tool functions well for basic voltage policy jobs. It protects circuits from voltage spikes. It secures voltage rises. It offers a steady reference voltage. You see it in power materials frequently. It also aids protect delicate inputs. It protects against overvoltage damage. Battery-powered tools utilize it. Consumer electronic devices use it as well.

The optimal reverse leakage current is 5 microamps. This is determined at 6.2 volts. Leakage is really reduced. This is efficient. The diode carries out dependably. Its ahead voltage has to do with 1 volt. This is typical for silicon diodes. It carries out existing when onward biased.

Taking care of surface-mount components requires treatment. Usage proper soldering techniques. Comply with the recommended temperature level account. This avoids damage. Check the datasheet for exact mounting information. Take note of polarity. The cathode end is noted. Mount it appropriately.

(MMSZ8V2ET1 DIODE ZENER 8.2V 500MW SOD123)

Applications of MMSZ8V2ET1 DIODE ZENER 8.2V 500MW SOD123

This MMSZ8V2ET1 diode is a Zener diode. It manages voltage at 8.2 volts. It deals with up to 500 milliwatts of power. Its little SOD123 plan fits limited rooms. Lots of circuits need secure voltage. This Zener diode provides that. It quits voltage from going expensive. It safeguards sensitive components.

Power products commonly use this diode. It keeps the output voltage steady at 8.2 V. This benefits powering various other chips. Many chips require tidy, trusted power. This diode assists give them that. Circuits with altering lots benefit. Voltage stays constant.

It protects against voltage spikes. Abrupt voltage rises occur. They can damage transistors or ICs. Area this Zener diode across the high-voltage line. It secures any type of spike over 8.2 V. It shunts excess present to ground. This conserves expensive parts. Inputs and outcomes often need this protection.

It acts as a voltage referral. Some circuits need a known voltage factor. This diode offers a stable 8.2 V recommendation. It’s less expensive than a few other recommendation parts. It works well for fundamental demands. Battery chargers occasionally utilize it. It aids set the charging voltage level. Sensing unit circuits may use it also. It ensures precise readings.

Its 8.2 V rating works. Lots of typical logic chips utilize 5V or 3.3 V. An 8.2 V Zener supplies great defense headroom. It turns on prior to damages occurs. The SOD123 dimension is easy to put on motherboard. It saves space. It handles adequate power for several tiny work. This diode is an usual choice. Developers choose it for integrity and expense. It solves basic voltage troubles.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality MMSZ8V2ET1 DIODE ZENER 8.2V 500MW SOD123, please send us inquiries; we will be here to help you.

 

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

 

Shipment

By sea, by air, by express, as customers request.

 

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of MMSZ8V2ET1 DIODE ZENER 8.2V 500MW SOD123

What is the MMSZ8V2ET1 diode for?
This diode regulates voltage. It keeps a steady 8.2 volts across its terminals. Circuits need this for stable power. It protects sensitive parts from voltage spikes.

Is the voltage exactly 8.2 volts?
The voltage is close to 8.2 volts. It is not perfectly exact. The actual voltage changes slightly with temperature. It changes slightly with current too. The datasheet shows the tolerance range. Check the datasheet for precise values.

How much power can it handle?
This diode handles 500 milliwatts maximum. Exceeding this power damages the diode. Calculate the power using voltage and current. Power equals voltage times current. Keep power under 500mW always. Use a heat sink if needed.

What does SOD123 mean?
SOD123 is the package size. It is very small. The diode fits tight spaces on circuit boards. It is suitable for surface mount soldering. This is common in modern electronics manufacturing.

Can I use a different Zener diode?
You can use another 8.2V Zener diode. The replacement must match key specs. The voltage must be 8.2V. The power rating must be 500mW or higher. The package must be SOD123 or compatible. Always verify the datasheet first.

(MMSZ8V2ET1 DIODE ZENER 8.2V 500MW SOD123)