MMSZ5234BT3 DIODE ZENER 6.2V 500MW SOD123

Introduction of MMSZ5234BT3 DIODE ZENER 6.2V 500MW SOD123

The MMSZ5234BT3 DIODE ZENER 6.2V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, MMSZ5234BT3 DIODE ZENER 6.2V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

Features and Benefits of MMSZ5234BT3 DIODE ZENER 6.2V 500MW SOD123

Compact design: Because no additional isolation components are required, MMSZ5234BT3 DIODE ZENER 6.2V 500MW SOD123s are typically smaller and lighter in weight.

High performance: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

High Reliability: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Easy to install and maintain: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(MMSZ5234BT3 DIODE ZENER 6.2V 500MW SOD123)

Specification of MMSZ5234BT3 DIODE ZENER 6.2V 500MW SOD123

The MMSZ5234BT3 is a Zener diode. It regulates voltage in electronic circuits. This part provides a steady 6.2V reference voltage. Its key specification is the Zener voltage, 6.2 volts. This voltage is critical for stable operation.

The diode handles a maximum power dissipation of 500 milliwatts. This power rating matters for reliability. Exceeding it can damage the component. The SOD123 surface-mount package houses this diode. This package is small and common. It fits well on modern circuit boards.

Voltage tolerance is another important factor. The actual Zener voltage might vary slightly. The tolerance is typically ±5%. So, the voltage could range from about 5.89V to 6.51V. Designers must account for this possible variation.

The diode works well over a temperature range. Standard operation is usually from -65°C to +150°C. This suits most electronic environments. Its maximum reverse leakage current is low. This ensures minimal wasted power when biased correctly.

The forward voltage is about 1V at moderate currents. This is standard for silicon diodes. The device offers good voltage regulation characteristics. It maintains its voltage despite reasonable changes in current flow. This stability is essential.

The SOD123 package provides two terminals. These terminals are designed for easy soldering. They work with standard reflow or wave soldering processes. This diode is suitable for various applications. Common uses include voltage regulation and voltage reference circuits. It protects sensitive components from overvoltage spikes. It also clamps signals to safe levels.

(MMSZ5234BT3 DIODE ZENER 6.2V 500MW SOD123)

Applications of MMSZ5234BT3 DIODE ZENER 6.2V 500MW SOD123

This MMSZ5234BT3 diode is a Zener type. It provides a stable 6.2 volts. It handles 500 milliwatts of power. It comes in a tiny SOD123 plastic case. This diode is very useful in many circuits.

One big job is protecting sensitive parts. It stops voltage spikes. It blocks harmful surges. It protects inputs and outputs. You often find it guarding USB ports. It shields data lines. It helps prevent damage from static electricity (ESD). Your car’s electronics use it for protection. It handles voltage swings in vehicles. Consumer gadgets rely on it too.

It also works well for voltage regulation. It keeps a steady 6.2V point. Designers use it as a simple voltage reference. It provides a known voltage level. This is good for basic power supplies. It can regulate lower power circuits. It works where space is tight. Its small size fits easily.

You see this diode in many places. It protects microcontrollers. It shields sensors. It safeguards communication interfaces. It provides stable reference points. It works in power management sections. Its reliability is important. Its 500mW rating is sufficient for many tasks. Its SOD123 package is standard. This makes assembly easy and cheap. It is a common choice for designers. It offers good performance for the cost. It solves basic voltage control needs. It handles protection jobs effectively. It is found in power adapters. It is used in battery-powered devices. It operates in industrial controls. It functions in portable gadgets.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality MMSZ5234BT3 DIODE ZENER 6.2V 500MW SOD123, please send us inquiries; we will be here to help you.

 

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

 

Shipment

By sea, by air, by express, as customers request.

 

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of MMSZ5234BT3 DIODE ZENER 6.2V 500MW SOD123

What is the MMSZ5234BT3 diode?
It’s a Zener diode. Its main job is voltage regulation. It keeps a steady voltage in circuits.

What voltage does it regulate to?
It regulates to 6.2 volts. This is its nominal Zener voltage. The actual voltage might be slightly different. It could be between 6.13 volts and 6.27 volts. This is normal.

How much power can it handle?
It can handle up to 500 milliwatts. This is its maximum power dissipation. You must not exceed this limit. Exceeding it damages the diode. Consider the circuit’s temperature too. Heat reduces its safe power handling.

How big is this diode?
It comes in a SOD123 surface-mount package. This package is very small. It’s about the size of a grain of rice. Its small size saves space on circuit boards. It’s good for modern electronics.

How do I use it correctly?
Connect it with the cathode stripe facing the higher voltage. You need a series resistor. This resistor limits the current flowing through the diode. The current must stay below the diode’s maximum rating. Calculate the resistor value carefully. It depends on your input voltage and the load current. This setup protects the diode. It ensures stable voltage regulation.

(MMSZ5234BT3 DIODE ZENER 6.2V 500MW SOD123)