MMSZ4689ET1 DIODE ZENER 5.1V 500MW SOD123

Introduction of MMSZ4689ET1 DIODE ZENER 5.1V 500MW SOD123

The MMSZ4689ET1 DIODE ZENER 5.1V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, MMSZ4689ET1 DIODE ZENER 5.1V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

Features and Benefits of MMSZ4689ET1 DIODE ZENER 5.1V 500MW SOD123

Compact design: Because no additional isolation components are required, MMSZ4689ET1 DIODE ZENER 5.1V 500MW SOD123s are typically smaller and lighter in weight.

High performance: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

High Reliability: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Easy to install and maintain: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(MMSZ4689ET1 DIODE ZENER 5.1V 500MW SOD123)

Specification of MMSZ4689ET1 DIODE ZENER 5.1V 500MW SOD123

This diode manages voltage at 5.1 volts. It’s a Zener diode. The SOD123 surface-mount bundle holds it. This package is small. Developers fit it easily on modern motherboard. Its compact dimension aids in tight rooms. The diode handles approximately 500 milliwatts of power. This power ranking is critical. It demonstrates how much energy the diode can take care of securely prior to risking damages. Exceeding this limitation misbehaves. It can trigger long-term failing.

The small voltage is 5.1 V. Real components have minor variations. The tolerance is ± 5%. Real voltage could be between 4.845 V and 5.355 V. This precision is important for secure circuits. Temperature adjustments affect performance. The operating variety is -65 ° C to +150 ° C. It works accurately within this span. Storage temperature levels match this variety as well.

The diode protects sensitive electronic devices. It clamps voltage spikes. It protects against damages from overvoltage occasions. Usual uses include voltage guideline. It maintains power supply outputs. It provides referral voltages. It safeguards inputs on microcontrollers. It safeguards communication lines. Reverse bias procedure defines its feature. It conducts substantially only when voltage surpasses its Zener point. Listed below this voltage, it obstructs existing flow well. Its leakage current is reduced.

Thermal management issues. The 500mW ranking depends upon the board. Appropriate PCB copper area assists dissipate warmth. Good soldering makes sure electric connection. It also helps thermal transfer. Always check the operating problems. Make sure power dissipation stays under the optimum. Surpassing it reduces diode life. The SOD123 bundle has conventional dimensions. Reel packaging is regular for computerized assembly. Handling follows basic ESD safety measures. Static electrical energy can harm the part.

(MMSZ4689ET1 DIODE ZENER 5.1V 500MW SOD123)

Applications of MMSZ4689ET1 DIODE ZENER 5.1V 500MW SOD123

The MMSZ4689ET1 is a Zener diode. It gives a secure 5.1 volt reference. Its power score is 500 milliwatts. The little SOD123 plan saves room on circuit card. This diode is really beneficial in electronic devices.

One primary task is voltage regulation. Circuits need stable voltage to work right. Input voltage can in some cases be too high. The MMSZ4689ET1 clamps this excess voltage. It maintains the voltage at 5.1 volts. This protects delicate parts downstream. It imitates a security valve for power.

An additional key usage is rise protection. Electrical spikes happen. These spikes can damage components. The diode secures circuits. It carries out when voltage spikes above 5.1 volts. It shunts the dangerous rise away. This safeguards inputs and outcomes.

It likewise serves as a voltage reference. Some circuits require an accurate voltage factor. The 5.1 V Zener voltage is secure. Designers use it as a known baseline. This is essential for sensing units and measurement tools. Precision relies on a great referral.

Waveform clipping is an additional application. Signals sometimes need shaping. The diode can clip off parts of a signal. It cuts voltages over 5.1 volts. This customizes waveforms as needed.

The SOD123 package is really little. This benefits modern, portable gadgets. Phones and wearables need little components. This diode fits flawlessly. Its small dimension does not hurt efficiency. Dependability remains high.

Designers pick this diode often. Its 5.1 V rating is common. The 500mW power handles numerous jobs. It supplies great security and law. Cost is low for the value it provides. It’s a standard part in lots of designs.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality MMSZ4689ET1 DIODE ZENER 5.1V 500MW SOD123, please send us inquiries; we will be here to help you.

 

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

 

Shipment

By sea, by air, by express, as customers request.

 

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of MMSZ4689ET1 DIODE ZENER 5.1V 500MW SOD123

What is the MMSZ4689ET1 diode used for?
This Zener diode regulates voltage. It keeps circuits stable at 5.1 volts. It protects sensitive parts from voltage spikes. Use it in power supplies or voltage reference circuits.

What are its main specs?
It has a 5.1V Zener voltage. It handles 500 milliwatts of power. It comes in a tiny SOD123 surface-mount package. The voltage tolerance is ±5%.

How much power can it handle safely?
The max power is 500mW. Exceeding this damages the diode. Calculate power by multiplying current and voltage. Stay below 500mW for reliability.

Why is the SOD123 package important?
SOD123 saves space on circuit boards. It suits automated manufacturing. The small size fits tight designs. It has clear polarity markings.

What precautions should I take when using it?
Connect the cathode (striped end) correctly. Avoid exceeding 500mW power. Watch temperature—heat reduces its capacity. Pair it with a current-limiting resistor.

(MMSZ4689ET1 DIODE ZENER 5.1V 500MW SOD123)