MMSZ10T3 DIODE ZENER 10V 500MW SOD123

Introduction of MMSZ10T3 DIODE ZENER 10V 500MW SOD123

The MMSZ10T3 DIODE ZENER 10V 500MW SOD123 is a power electronic device that consists of multiple diodes integrated into a single package and is primarily used for power conversion and protection circuits. Unlike isolated modules, MMSZ10T3 DIODE ZENER 10V 500MW SOD123 does not use transformers or similar isolation components to separate inputs and outputs. This design simplifies the circuit structure, reduces cost, and improves efficiency.

Features and Benefits of MMSZ10T3 DIODE ZENER 10V 500MW SOD123

Compact design: Because no additional isolation components are required, MMSZ10T3 DIODE ZENER 10V 500MW SOD123s are typically smaller and lighter in weight.

High performance: Reduced energy loss due to isolation components improves overall conversion efficiency.

Low Cost: Expensive isolation components are eliminated, resulting in lower manufacturing costs.

Fast Response: The built-in Fast Recovery Diode (FRD) can quickly switch from an on-state to a blocking state, reducing switching losses.

High Reliability: Advanced materials and technologies are used to ensure stable operation even in harsh environments.

Easy to install and maintain: Standardized interfaces and connections simplify the installation process and facilitate later maintenance.

(MMSZ10T3 DIODE ZENER 10V 500MW SOD123)

Specification of MMSZ10T3 DIODE ZENER 10V 500MW SOD123

This diode is the MMSZ10T3. It is a Zener diode. Its job is voltage regulation. It provides a stable 10 volt reference. The nominal Zener voltage is 10 volts. There is a tolerance. This tolerance is ±5%. So the actual voltage could be 9.5 volts. It might be 10.5 volts. This depends on the specific part.

Its package is SOD123. This is a small surface mount package. It saves space on circuit boards. The overall length is about 3.7mm. It is designed for automated assembly. Hand soldering is possible too. But care is needed.

The power rating is 500 milliwatts. This is the maximum power it can handle. Exceeding this damages the diode. Power equals voltage times current. Keep the current within limits. The maximum continuous current depends on voltage. At 10 volts, max current is roughly 50mA.

Leakage current is important. Below the Zener voltage, only a tiny current flows. This is the leakage or reverse current. For this diode, leakage is low. At 7.6 volts, it’s typically 0.1 microamps. The maximum is 5 microamps.

Thermal performance matters. Heat affects operation. The thermal resistance is 200°C per watt. This tells you how hot it gets. Good board layout helps cooling. Avoid placing near heat sources.

It clamps voltage spikes. It protects sensitive parts. Use it for basic voltage regulation. It stabilizes power supplies. It provides reference voltages. It protects inputs from overvoltage. Its small size fits compact designs.

The cathode is marked by a band. Identify this end correctly. Mount it the right way. Check the datasheet for exact details. Operating temperature range is -65°C to +150°C. It works in many environments. Storage temperature is the same.

(MMSZ10T3 DIODE ZENER 10V 500MW SOD123)

Applications of MMSZ10T3 DIODE ZENER 10V 500MW SOD123

The MMSZ10T3 is a 10V Zener diode in a compact SOD123 package. It handles up to 500 milliwatts of power. This small size makes it perfect for tight spaces on circuit boards. You find it everywhere in modern electronics. Its main job is voltage regulation. It keeps a steady 10V output even if the input voltage changes or the load shifts. This stability is crucial for sensitive parts. It protects microcontrollers, sensors, and other ICs from voltage spikes. Think power supplies feeding delicate logic circuits. It acts like a voltage clamp. It prevents signals or supply lines from going above 10V. This guards inputs from damage caused by overvoltage. Many circuits need a fixed voltage reference. The MMSZ10T3 provides a reliable 10V point. This is vital for analog-to-digital converters (ADCs) or precision measurement tools needing accurate comparisons. Its low cost and small footprint are big advantages. Designers use it extensively in consumer goods. Battery chargers, USB devices, and set-top boxes often rely on it. It handles protection tasks well. It shields communication lines like RS-232 or low-speed data buses from static discharge or minor surges. Industrial controls use it too. It stabilizes voltage for sensor interfaces or small motor controllers. Automotive electronics benefit from its regulation in non-critical 12V systems. It manages power for interior lights or dashboard displays. Engineers choose it for simple, effective voltage control. It offers a solid solution without complex circuitry. Its 500mW rating suits low to moderate power needs. The SOD123 package is easy to solder. It works reliably for surface-mount assembly. This diode is a fundamental part for reliable electronic design.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality MMSZ10T3 DIODE ZENER 10V 500MW SOD123, please send us inquiries; we will be here to help you.

 

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

 

Shipment

By sea, by air, by express, as customers request.

 

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of MMSZ10T3 DIODE ZENER 10V 500MW SOD123

What is the MMSZ10T3 diode?
It’s a Zener diode. This part regulates voltage. Its job is clamping voltage at 10 volts. Use it where stable voltage is needed.

What does 10V and 500MW mean?
The “10V” is its Zener voltage. It breaks down at 10 volts. The “500MW” means 500 milliwatts power rating. This tells you the max power it can handle safely. Exceeding this power damages the diode.

How is it different from a normal diode?
Normal diodes block reverse current. Zener diodes conduct in reverse once voltage hits the breakdown point. The MMSZ10T3 does this at 10 volts. Regular diodes don’t regulate voltage this way.

Does temperature affect it?
Yes, temperature matters. Its breakdown voltage changes with temperature. The datasheet gives exact numbers. Design circuits knowing voltage might shift slightly hot or cold.

Where is this diode used?
It protects circuits from voltage spikes. It provides a stable reference voltage. Common uses include protecting inputs or power supplies. Its SOD123 package is small, good for tight spaces. Check the power dissipation stays under 500mW.

(MMSZ10T3 DIODE ZENER 10V 500MW SOD123)