SCR Thyristor Module Tiristor 2000amp N1718NS120 Power Electronic Parts Phase control thyristor diode

Overview of Phase Control Thyristor

A phase control thyristor, often referred to as a triac or SCR (Silicon Controlled Rectifier) in certain applications, is a semiconductor device used for controlling the amount of power delivered to a load by adjusting the phase angle at which the AC waveform is allowed to conduct. This method of control is known as phase angle control or simply phase control. Phase control thyristors are widely used in various applications that require precise regulation of electrical power, such as lighting dimmers, motor speed controls, temperature controllers, and more.

Features of Phase Control Thyristor

Phase Angle Control: Allows adjustment of the conduction point within each half-cycle of the AC waveform, enabling precise control over the average power delivered to the load.

High Efficiency: Operates with minimal losses when conducting, providing efficient power control.

Bidirectional Conductivity (Triacs): For AC applications, triacs can conduct current in both directions, making them suitable for full-wave control of AC loads.

Unidirectional Conductivity (SCRs): SCRs conduct current in one direction only and are typically used for half-wave control of AC or DC loads.

Gate Triggering: Conduction begins when a small current is applied to the gate terminal, allowing for easy control of the turn-on point.

Latching Current: Once triggered, the thyristor continues to conduct until the current through it falls below a certain level called the holding current.

Temperature Sensitivity: Performance can be affected by temperature changes, requiring thermal management considerations in design.

Voltage and Current Ratings: Available in a wide range of voltage and current ratings to suit different application needs.

Noise Generation: Can generate electromagnetic interference (EMI), necessitating proper filtering and shielding in sensitive applications.

Protection Mechanisms: Often include built-in protection against overvoltage and overcurrent conditions to safeguard the device and connected systems.

(SCR Thyristor Module Tiristor 2000amp N1718NS120 Power Electronic Parts Phase control thyristor diode)

Specification of SCR Thyristor Module Tiristor 2000amp N1718NS120 Power Electronic Parts Phase control thyristor diode

The SCR Thyristor Module N1718NS120 is developed for high-power phase control applications. This module supports a maximum existing score of 2000 amps. It makes certain effective power management in commercial systems. The voltage score is 1200V. This makes it ideal for high-voltage atmospheres. The module utilizes a durable thyristor-diode configuration. It supplies trustworthy switching and rectification.

The style focuses on thermal security. The component includes a separated base. This allows direct installing to warm sinks. Warmth dissipation is maximized. This prevents getting too hot throughout constant operation. The operating temperature array is -40 ° C to 125 ° C. It carries out well in rough problems.

The module is built for stage control in a/c systems. It readjusts power flow in motor drives, heating unit, or lights controls. The thyristor activates precisely. This makes sure smooth voltage law. The diode supports reverse voltage blocking. This safeguards the circuit from damages.

Installation is uncomplicated. The module has typical mechanical measurements. It fits typical industrial configurations. Maintenance requirements are very little. Normal examination of links is recommended. This makes sure long-lasting dependability.

Electrical insulation meets sector criteria. The module endures high voltage rises. This minimizes failure risks. The terminals are corrosion-resistant. They keep conductivity over time.

Applications consist of power supplies, industrial rectifiers, and motor controllers. The module deals with hefty lots. It suits steel plants, chemical manufacturing facilities, or renewable energy systems. Compatibility with control circuits is smooth. Exterior triggers activate the thyristor quickly.

The N1718NS120 prioritizes sturdiness. Products are chosen for high mechanical toughness. Vibration resistance is examined. This guarantees security in dynamic environments. The component is packaged to stop damage throughout delivery.

Efficiency examinations verify uniformity. Each system undergoes high quality checks. Criteria like ahead voltage decline and leak present are verified. This guarantees compliance with specs.

The component is an affordable service. It decreases downtime in vital procedures. Individuals take advantage of prolonged service life. Substitute periods are much longer compared to conventional thyristors.

Technical support is readily available for integration difficulties. Custom setups can be talked about with suppliers. Security guidelines must be complied with throughout installation. Appropriate handling avoids unintentional damages.

(SCR Thyristor Module Tiristor 2000amp N1718NS120 Power Electronic Parts Phase control thyristor diode)

Applications of SCR Thyristor Module Tiristor 2000amp N1718NS120 Power Electronic Parts Phase control thyristor diode

The SCR Thyristor Module Tiristor 2000amp N1718NS120 is a high-power digital part developed for stage control applications. It deals with currents approximately 2000 amps, making it appropriate for industrial systems requiring durable power administration. The module integrates thyristors and diodes to manage electrical tons successfully. Its key feature is adjusting voltage and present phases in air conditioning circuits, making it possible for specific control over electric motor speeds, burner, and lights systems.

This component is constructed for integrity in rough environments. It features a rugged design with sophisticated thermal administration to stop overheating during extended procedure. The reduced trigger current need ensures steady efficiency even under rising and fall power problems. Designers use it in devices like commercial rectifiers, voltage regulators, and soft beginners. Its small framework simplifies installment in existing arrangements without significant alterations.

Industries such as manufacturing, energy, and transportation take advantage of this thyristor component. Factories deploy it in equipment requiring variable speed drives or temperature adjustments. Power plants use it to handle grid security and decrease energy waste. In railway systems, it helps manage traction motors and auxiliary power units. The component’s high rise tolerance safeguards versus voltage spikes typical in sturdy applications.

Upkeep requirements are marginal due to the module’s sturdy products and self-protection systems. It includes built-in safeguards against brief circuits and overloads. Users stay clear of frequent substitutes, lowering operational prices gradually. Compatibility with basic control interfaces permits smooth combination into automated systems. Professionals keep track of efficiency by means of analysis indicators, making sure fast troubleshooting.

The N1718NS120 design sustains both single-phase and three-phase configurations. This versatility makes it versatile to diverse electric configurations. Personalized triggering alternatives allow engineers fine-tune reaction times based on specific procedure requirements. Its high seclusion voltage boosts safety and security in risky settings.

Applications extend to renewable resource systems like wind generators and solar inverters. The module enhances power conversion efficiency, reducing losses throughout power transfer. It additionally contributes in welding equipment, where specific existing law enhances weld top quality. A/c systems use it to adjust compressor speeds, reducing power intake.

This thyristor component meets international standards for electromagnetic compatibility and electrical security. Manufacturers trust its uniformity sought after operations. Its style prioritizes longevity, making sure continuous efficiency without degradation. The combination of power handling, flexibility, and resilience makes it a critical component in modern commercial electronics.

Company Profile

PDDN Photoelectron Technology Co., Ltd.(sales@pddn.com) is one of the leading enterprises in power electronics technology and power products, which is fully involved in developing solar inverters， transformers, voltage regulators, distribution cabinets, thyristors， modules， diodes， heaters, and other electronic devices or semiconductors. We will be committed to providing users with high-quality, efficient products and considerate service.

It accepts payment via Credit Card, T/T, West Union, and Paypal. PDDN will ship the goods to customers overseas through FedEx, DHL, by sea, or by air. If you want high-quality SCR Thyristor Module Tiristor 2000amp N1718NS120 Power Electronic Parts Phase control thyristor diode, please send us inquiries; we will be here to help you.

Payment Methods

L/C, T/T, Western Union, Paypal, Credit Card etc.

Shipment

By sea, by air, by express, as customers request.

Storage Conditions

1) Store in a dry environment at room temperature.

2) Avoid damp and high temperature.

3) Use immediately after opening the inner packing bag.

5 FAQs of SCR Thyristor Module Tiristor 2000amp N1718NS120 Power Electronic Parts Phase control thyristor diode

What is the SCR Thyristor Module N1718NS120 used for? The module controls power in industrial systems. It manages phase control for motor drives, heating systems, or power supplies. It handles high currents up to 2000 amps. It works with voltages up to 1200 volts. It switches power efficiently in heavy-duty applications.

What are the key specs of the N1718NS120? The rated current is 2000 amps. The peak voltage is 1200 volts. The trigger current stays low for easy control. Switching speed is fast to reduce energy loss. It operates in temperatures from -40°C to 125°C. These specs make it fit high-power setups.

How do I install the module correctly? Proper heat sinking is critical. Thermal paste improves contact between the module and heatsink. Mount the module firmly to avoid vibration damage. Follow torque guidelines for screws. Check electrical connections are tight. Keep the module isolated from other parts. Avoid dusty or damp environments.

What makes this module better than others? The design handles tough conditions. It stays stable under high heat. Low thermal resistance prevents overheating. Cooling happens efficiently. It lasts longer with proper use. It works reliably in heavy industrial settings.

How do I maintain the module? Inspect it regularly for physical damage. Clean the heatsink to remove dust. Test cooling systems for airflow. Monitor temperature during operation. Replace the module if performance drops. Avoid overloading beyond rated specs.

(SCR Thyristor Module Tiristor 2000amp N1718NS120 Power Electronic Parts Phase control thyristor diode)